B273

1mm Pitch Cable-to-Board Connectors supporting LVDS signal

FX15 Series

Contacts consolidated into 1 row for equal length transmission lines

Mating side: 1 mm pitch, staggered 2-row construction

Termination side: 0.5 mm pitch, 1-row construction

1. Space saving

Reduction in space is achieved by designing the

contacts in 2-row staggered 1 mm pitch on the mating

side and on a single row 0.5 mm pitch on the termination

side (Fig. 1).

2. Equal length transmission lines

Contact configuration creates equal length transmission

lines preventing deterioration of LVDS signal within the

connector (Fig.1).

3. Different types

Availability of types with or without metal shields allows

flexibility of applications and cost reduction.

4. Self alignment and self-guiding

Built-in guide posts allow secure self-alignment within

±1.5 mm (Fig.2).

5. Secure and complete mating / unmating

Side latch-locks assure and confirm complete and

secure mating of plugs to receptacles while permitting

ease of disconnection (Fig. 3).

6. Enhanced shielding effectiveness

Availability of version with enlarged metal shields

(preventing intrusion or emission of the electromagnetic

interference) further protects the integrity of LVDS signal

(FX15S series, Fig.4)

7. RoHS compliant

All components and materials comply with the

reqirements of EU Directive 2002/95/EC.

FPD-TV, FPD panels and other applications requiring

secure and reliable connection and transmission signal

integrity.

Space saving, Equal length transmission lines

Patent

pending

0

0.1 0.2

0.3

0.5

1

2

3

1.5

-10

-20

-30

-40

-50

Frequency (GHz)

With metal

Without metal

High Shielding Effectiveness

Fig.1

Self-alignment of ±1.5 mm

Side latch -locks

Large guide post

1.5mm

1.5mm

1.5mm

With metal shields

(FX15 and FX15S Series)

Without metal shields

(FX15M Series)

Fig.2

Fig.3

Fig.4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.