Electronic Components Datasheet Search |
|
LMH6704MFNOPB Datasheet(PDF) 3 Page - National Semiconductor (TI) |
|
|
LMH6704MFNOPB Datasheet(HTML) 3 Page - National Semiconductor (TI) |
3 / 20 page LMH6704 www.ti.com SNOSAD0C – FEBRUARY 2005 – REVISED MARCH 2013 Electrical Characteristics (1) TA = +25°C , AV = +2, VS = ±5V, RL = 100Ω; unless specified. Symbol Parameter Conditions Min (2) Typ (2) Max (2) Units Dynamic Performance SSBW VOUT = 0.5 VPP, AV = +1 650 SSBW -3 dB Bandwidth VOUT = 0.5 VPP 450 MHz LSBW VOUT = 2 VPP 400 GF0.1dB 0.1 dB Gain Bandwidth VOUT = 2 VPP 200 MHz SR Slew Rate VOUT = 4 VPP, 40% to 60% (3) 3000 V/µs Rise and Fall Time TRS/TRL 2V Step 0.9 ns (10% to 90%) ts Settling Time to 0.1% 2V Step 10 ns Distortion and Noise Response HD2L 2nd Harmonic Distortion VOUT = 2.0 VPP, f = 10 MHz −62 dBc HD2H VOUT = 2.0 VPP, f = 40 MHz −52 HD3L 3rd Harmonic Distortion VOUT = 2.0 VPP, f = 10 MHz −78 dBc HD3H VOUT = 2.0 VPP, f = 40 MHz −65 IMD Two-Tone Intermodulation f = 10 MHz, POUT = 10 dBm/tone −65 dBc AV = +2 10.5 VN Output Noise Voltage f = 100 kHz AV = +1 9.3 nV/ √Hz AV = −1 10.5 INN Non-Inverting Input Noise Current 3 pA/ √Hz DG Differential Gain RL = 150Ω, f = 4.43 MHz .02 % DP Differential Phase RL = 150Ω, f = 4.43 MHz 0.02 deg Static, DC Performance 1.98 2.00 2.02 AV Gain V/V 1.96 2.04 −1 +1 Gain Error % −2 +2 2 ±7 VIO Input Offset Voltage mV ±8.3 DVIO Input Offset Voltage Average Drift 35 μV/°C Non-Inverting (4) −5 ±15 IBN Input Bias Current μA ±18 ±22 IBI Input Bias Current Inverting 5 ±31 CMIR Common Mode Input Range VIO ≤ 15 mV ±1.9 ±2 V PSRR Power Supply Rejection Ratio DC 48 52 dB 47 RL = ∞ ±3.3 ±3.5 ±3.18 VO Output Voltage Swing V RL = 100Ω ±3.2 ±3.5 ±3.12 IO Linear Output Current VOUT ≤ 80 mV ±55 ±90 mA 11.5 12.5 Supply Current (Enabled) DIS = 2V, RL = ∞ 13.7 IS mA 0.25 0.9 Supply Current (Disabled) DIS = 0.8V, RL = ∞ 0.925 (1) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that TJ = TA. Parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ > TA. Min/Max ratings are based on production testing unless otherwise specified. (2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested on shipped production material. (3) Slew Rate is the average of the rising and falling edges. (4) Negative current implies current flowing out of the device. Copyright © 2005–2013, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: LMH6704 |
Similar Part No. - LMH6704MFNOPB |
|
Similar Description - LMH6704MFNOPB |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |