POWERLINE

DC/DC-Converter

RP15-S_DA

Series

Thermal Impedance

(6)

Natural convection

18.2°C/Watt

Natural convection with Heat Sink

15.8°C/Watt

Thermal Shock

MIL-STD-810F

Vibration

10-55Hz, 10G, 30 Min. along X, Y and Z

Relative Humidity

5% to 95% RH

Case Material

Nickel plated copper

Base Material

FR4 PCB

Potting Material

Epoxy (UL94-V0)

Conducted Emissions

(7)

EN55022

Class A

Radiated Emissions

EN55022

Class A

ESD

EN61000-4-2

Perf. Criteria A

Radiated Immunity

EN61000-4-3

Perf. Criteria A

Fast Transient

EN61000-4-4

Perf. Criteria A

Surge

(8)

EN61000-4-5

Perf. Criteria A

Conducted Immunity

EN61000-4-6

Perf. Criteria A

Weight

15g

Packing Quantity

Refer to App Notes for tube dimensions

8 pcs per Tube

Dimensions

25.4 x 25.4 x 9.9mm

MTBF

(9)

Bellcore TR-NWT-000332

MIL-HDBK 217F

1. Values at nominal input voltage and no load/full load.

2. Typical Value at nominal input voltage and full load.

3. Test by minimum Vin and constant resistor load.

4. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.

5. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.

Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SA/P)

Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SA/N).

If no suffix is specified, the control pin will be omitted.

6. Optional Heat-sink P/N is 7G-0047-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips

(add suffix -HC). See Application Notes for heatsink details.

7. Meets Class A with external input capacitors shown below. Will meet Class B with external common mode filter (see Application Notes)

8. Requires external capacitor to meet EN61000-4-5: 220µF/100V, low ESR (48mOhm)

9. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.

MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment).

Notes :

Trim Up

Trim Down

5

6

5

4

External Output Trimming (optional)

With suffix /CTRL, the output can be externally trimmed by

using the method shown here.

See Application Notes for details

REV:0/2014

P-43

www.recom-international.com