The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility

for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or

licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support

devices and/or systems.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Burr-Brown

recommends that all integrated circuits be handled with ap-

propriate precautions. Failure to observe proper handling and

installation procedures can cause damage.

ESD damage can range from subtle performance degradation

to complete device failure. Precision integrated circuits may

be more susceptible to damage because very small parametric

changes could cause the device not to meet its published

specifications.

ORDERING INFORMATION

PACKAGE

DRAWING

TEMPERATURE

PRODUCT

PACKAGE

RANGE

INA128PA

8-Pin Plastic DIP

006

–40

°C to +85°C

INA128P

8-Pin Plastic DIP

006

–40

°C to +85°C

INA128UA

SO-8 Surface-Mount

182

–40

°C to +85°C

INA128U

SO-8 Surface-Mount

182

–40

°C to +85°C

INA129PA

8-Pin Plastic DIP

006

–40

°C to +85°C

INA129P

8-Pin Plastic DIP

006

–40

°C to +85°C

INA129UA

SO-8 Surface-Mount

182

–40

°C to +85°C

INA129U

SO-8 Surface-Mount

182

–40

°C to +85°C

NOTE: (1) For detailed drawing and dimension table, please see end of data

sheet, or Appendix C of Burr-Brown IC Data Book.

PIN CONFIGURATION

8-Pin DIP and SO-8

R

G

V

–

IN

V

+

IN

V–

R

G

V+

V

O

Ref

1

2

3

4

8

7

6

5

Top View

Supply Voltage ..................................................................................

±18V

Analog Input Voltage Range .............................................................

±40V

Output Short-Circuit (to ground) .............................................. Continuous

Operating Temperature ................................................. –40

°C to +125°C

Storage Temperature ..................................................... –40

°C to +125°C

Junction Temperature .................................................................... +150

°C

Lead Temperature (soldering, 10s) ............................................... +300

°C

ABSOLUTE MAXIMUM RATINGS