Electronic Components Datasheet Search |
|
AT22LV10L-25PI Datasheet(PDF) 2 Page - ATMEL Corporation |
|
AT22LV10L-25PI Datasheet(HTML) 2 Page - ATMEL Corporation |
2 / 11 page AT22LV10(L) 2 The AT22LV10L provides the optimum low power CMOS PLD solution, with low DC power (1 mA typical at VCC = 3.3V) and full CMOS output levels. The AT22LV10L signifi- cantly reduces total system power, allowing battery pow- ered operation. Full CMOS output levels help reduce power in many other system components. The AT22LV10 and AT22LV10L logic architectures are identical to the familiar 22V10. Each output is allocated from eight to 16 product terms, which allows highly com- plex logic functions to be realized. Two additional product terms are included to provide syn- chronous preset and asynchronous reset. These terms are common to all ten registers. All registers are automatically cleared upon power up. Register preload simplifies testing. A security fuse prevents unauthorized copying of programmed fuse patterns. *NOTICE: Stresses beyond those listed under “Absolute Maxi- mum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other condi- tions beyond those indicated in the operational sec- tions of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Note: 1. Minimum voltage is -0.6V dc whihc may undershoot to -2.0V for pulses of less than 20 ns. Maximum pin voltage is V CC + 0.75V dc which may undershoot to V CC + 2.0V for pulses of less than 20 ns. Absolute Maximum Ratings* Temperature Under Bias ................................ -55°C to +125°C Storage Temperature ..................................... -65°C to +150°C Voltage on Any Pin with Respect to Ground ........................................ -2.0V to +7.0V (1) Voltage on Input Pins with Respect to Ground During Programming ................................... -2.0V to +14.0V (1) Programming Voltage with Respect to Ground ...................................... -2.0V to +14.0V (1) Integrated UV Erase Dose ............................. 7258 W•sec/cm2 Logic Options Output Options DC and AC Operating Conditions Commercial Industrial Operating Temperature (Case) 0°C - 70°C -40°C - 85°C V CC Power Supply 3.0V to 5.5V 3.0V to 5.5V |
Similar Part No. - AT22LV10L-25PI |
|
Similar Description - AT22LV10L-25PI |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |