SN54LV32, SN74LV32

QUADRUPLE 2INPUT POSITIVEOR GATES

SCLS188C − FEBRUARY 1993 − REVISED APRIL 1996

2

POST OFFICE BOX 655303

POST OFFICE BOX 1443

logic diagram, each gate (positive logic)

1

1A

2

1B

4

2A

5

2B

9

3A

10

3B

12

4A

13

4B

A

B

Y

≥ 1

1Y

3

2Y

6

3Y

8

4Y

11

† This symbol is in accordance with ANSI/IEEE Std 91-1984 and

IEC Publication 617-12.

Pin numbers shown are for D, DB, J, PW, and W packages.

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±25 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.25 W

. . . . . . . . . . . . . . . . . . .

DB or PW package

0.5 W

. . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. This value is limited to 7 V maximum.

3. The maximum package power dissipation is calculated using a junction temperature of 150

°C and a board trace length of 750 mils.