US

UK

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

© Coilcraft Inc. 2013

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

SMT Power Inductors–LPO4815

Document 354 -1

max

typ

(µH)

(Ohms) (MHz) (A)

(A)

LPO4815-102ML_

1.0 ±20%

0.036

230

1.6

1.9

LPO4815-152ML_

1.5 ±20%

0.085

200

1.5

1.7

LPO4815-222ML_

2.2 ±20%

0.088

150

1.1

1.5

LPO4815-332ML_

3.3 ±20%

0.12

115

0.90

1.3

LPO4815-392ML_

3.9 ±20%

0.13

105

0.86

1.2

LPO4815-472ML_

4.7 ±20%

0.15

95

0.77

1.1

LPO4815-682ML_

6.8 ±20%

0.18

72

0.65

1.0

LPO4815-822ML_

8.2 ±20%

0.22

65

0.58

0.90

LPO4815-103KL_

10 ±10%

0.23

60

0.50

0.85

LPO4815-123KL_

12 ±10%

0.31

50

0.45

0.80

LPO4815-153KL_

15 ±10%

0.36

45

0.42

0.75

LPO4815-223KL_

22 ±10%

0.46

35

0.37

0.70

LPO4815-333KL_

33 ±10%

0.71

30

0.28

0.65

LPO4815-393KL_

39 ±10%

0.83

25

0.26

0.60

LPO4815-473KL_

47 ±10%

1.20

25

0.22

0.55

LPO4815-683KL_

68 ±10%

1.40

20

0.20

0.45

LPO4815-104KL_

100 ±10%

2.15

15

0.15

0.36

LPO4815-154KL_

150 ±10%

3.15

12

0.13

0.30

LPO4815-224KL_

220±10%

4.30

10

0.11

0.27

1. When ordering, please specify

termination and packaging codes:

LPO4815-224KLC

Termination: L = RoHS compliant silver-palladium-platinum-glass frit.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5)

or

S = non-RoHS tin-lead (63/37).

Packaging: C = 7

″ machine-ready reel. EIA-481 embossed plastic

tape (1000 parts per full reel).

B = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use

code letter C instead.

D = 13

″ machine-ready reel. EIA-481 embossed plastic

tape (3500 parts per full reel).

2. Inductance tested at 100 kHz, 0.1 Vrms.

3. DCR measured on a micro-ohmmeter.

4. SRF measured using Agilent/HP 4191A or equivalent.

5. DC current at which the inductance drops 10% (typ) from its value with-

out current.

6. Current that causes a 40°C temperature rise from 25°C ambient.

7. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kit C376 contains 3 each of all values

Core material Ferrite

Core and winding loss See www.coilcraft.com/coreloss

Terminations RoHS compliant silver-palladium-platinum-glass frit.

Other terminations available at additional cost.

Weight 70.0 – 78.5 mg

Ambient temperature –40°C to +85°C with

Irms current, +85°C to

+125°C with derated current

Storage temperature Component: –40°C to +125°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 1000/7

″ reel; 3500/13″ reel Plastic tape: 12 mm wide,

0.3 mm thick, 8 mm pocket spacing, 1.6 mm pocket depth

Recommended pick and place nozzle OD: 4.6 mm; ID:

≤ 2.3 mm

PCB washing Tested with pure water or alcohol only. For other solvents,

see Doc787_PCB_Washing.pdf.

• Very low profile - only 1.5 mm high!

• Handles current up to 1.9 Amps rms

Document 354-1 Revised 10/14/08