Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

ADN2850BCPZ25 Datasheet(PDF) 1 Page - Analog Devices

Part No. ADN2850BCPZ25
Description  Nonvolatile Memory, Dual 1024-Position Digital Resistor
Download  28 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  AD [Analog Devices]
Homepage  http://www.analog.com
Logo 

ADN2850BCPZ25 Datasheet(HTML) 1 Page - Analog Devices

 
Zoom Inzoom in Zoom Outzoom out
 1 / 28 page
background image
Nonvolatile Memory, Dual
1024-Position Digital Resistor
Data Sheet
ADN2850
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2004–2012 Analog Devices, Inc. All rights reserved.
FEATURES
Dual-channel, 1024-position resolution
25 kΩ, 250 kΩ nominal resistance
Maximum ±8% nominal resistor tolerance error
Low temperature coefficient: 35 ppm/°C
2.7 V to 5 V single supply or ±2.5 V dual supply
Current monitoring configurable function
SPI-compatible serial interface
Nonvolatile memory stores wiper settings
Power-on refreshed with EEMEM settings
Permanent memory write protection
Resistance tolerance stored in EEMEM
26 bytes extra nonvolatile memory for user-defined
information
1M programming cycles
100-year typical data retention
APPLICATIONS
SONET, SDH, ATM, Gigabit Ethernet, DWDM laser diode
driver, optical supervisory systems
Mechanical rheostat replacement
Instrumentation gain adjustment
Programmable filters, delays, time constants
Sensor calibration
GENERAL DESCRIPTION
The ADN2850 is a dual-channel, nonvolatile memory1, digitally
controlled resistors2 with 1024-step resolution, offering
guaranteed maximum low resistor tolerance error of ±8%. The
device performs the same electronic adjustment function as a
mechanical rheostat with enhanced resolution, solid state
reliability, and superior low temperature coefficient
performance. The versatile programming of the ADN2850 via
an SPI®-compatible serial interface allows 16 modes of
operation and adjustment including scratchpad programming,
memory storing and restoring, increment/decrement, ±6 dB/step
log taper adjustment, wiper setting readback, and extra EEMEM1
for user-defined information such as memory data for other
components, look-up table, or system identification
information.
FUNCTIONAL BLOCK DIAGRAM
ADDR
DECODE
ADN2850
RDAC1
SERIAL
INTERFACE
CS
CLK
SDI
SDO
PR
WP
RDY
RDAC1
REGISTER
EEMEM1
CURRENT
MONITOR
EEMEM2
26 BYTES
RTOL*
USER EEMEM
POWER-ON
RESET
W1
B1
RDAC2
W2
B2
VDD
V1
V2
EEMEM
CONTROL
*RWB FULL SCALE TOLERANCE.
VSS
GND
RDAC1
REGISTER
I1
I2
Figure 1.
In the scratchpad programming mode, a specific setting can
be programmed directly to the RDAC2 register, which sets the
resistance between Terminal W and Terminal B. This setting can
be stored into the EEMEM and is restored automatically to the
RDAC register during system power-on.
The EEMEM content can be restored dynamically or through
external
EE
AA
strobing, and a
AA
WPEE
AA
function protects EEMEM
contents. To simplify the programming, the independent or
simultaneous linear-step increment or decrement commands
can be used to move the RDAC wiper up or down, one step at a
time. For logarithmic ±6 dB changes in the wiper setting, the
left or right bit shift command can be used to double or halve the
RDAC wiper setting.
PR
The ADN2850 patterned resistance tolerance is stored in the
EEMEM. The actual full scale resistance can, therefore, be
known by the host processor in readback mode. The host can
execute the appropriate resistance step through a software
routine that simplifies open-loop applications as well as
precision calibration and tolerance matching applications.
The ADN2850 is available in the 5 mm × 5 mm 16-lead frame
chip scale LFCSP and thin, 16-lead TSSOP package. The part is
guaranteed to operate over the extended industrial temperature
range of −40°C to +85°C.
1
The terms nonvolatile memory and EEMEM are used interchangeably.
2
The terms digital resistor and RDAC are used interchangeably.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn