LPC2141FBD64 datasheet(1/45 Pages) NXP

Part #	LPC2141FBD64

Description	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Download	45 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

1 / 45 page

1.

General description

The LPC2141/42/44/46/48 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S

CPU with real-time emulation and embedded trace support, that combine the

microcontroller with embedded high-speed flash memory ranging from 32 kB to 512 kB. A

128-bit wide memory interface and a unique accelerator architecture enable 32-bit code

execution at the maximum clock rate. For critical code size applications, the alternative

16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.

Due to their tiny size and low power consumption, LPC2141/42/44/46/48 are ideal for

applications where miniaturization is a key requirement, such as access control and

point-of-sale. Serial communications interfaces ranging from a USB 2.0 Full-speed

device, multiple UARTs, SPI, SSP to I2C-bus and on-chip SRAM of 8 kB up to 40 kB,

make these devices very well suited for communication gateways and protocol

converters, soft modems, voice recognition and low end imaging, providing both large

buffer size and high processing power. Various 32-bit timers, single or dual 10-bit ADC(s),

10-bit DAC, PWM channels and 45 fast GPIO lines with up to nine edge or level sensitive

external interrupt pins make these microcontrollers suitable for industrial control and

medical systems.

2.

Features and benefits

2.1 Key features

 16-bit/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.

 8 kB to 40 kB of on-chip static RAM and 32 kB to 512 kB of on-chip flash memory.

128-bit wide interface/accelerator enables high-speed 60 MHz operation.

 In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot

loader software. Single flash sector or full chip erase in 400 ms and programming of

256 B in 1 ms.

 EmbeddedICE RT and Embedded Trace interfaces offer real-time debugging with the

on-chip RealMonitor software and high-speed tracing of instruction execution.

 USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM.

In addition, the LPC2146/48 provides 8 kB of on-chip RAM accessible to USB by DMA.

 One or two (LPC2141/42 vs. LPC2144/46/48) 10-bit ADCs provide a total of 6/14

analog inputs, with conversion times as low as 2.44

s per channel.

 Single 10-bit DAC provides variable analog output (LPC2142/44/46/48 only).

 Two 32-bit timers/external event counters (with four capture and four compare

channels each), PWM unit (six outputs) and watchdog.

 Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input.

LPC2141/42/44/46/48

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash

with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Rev. 5 — 12 August 2011

Product data sheet

Similar Part No. - LPC2141FBD64

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2141FBD64	193Kb / 38P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 01-3 October 2005
	LPC2141FBD64	189Kb / 39P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 03-19 October 2007
	LPC2141FBD64	192Kb / 40P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 04-17 November 2008

More results

Similar Description - LPC2141FBD64

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2141	193Kb / 38P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 01-3 October 2005
	LPC2141	413Kb / 45P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 5-12 August 2011
	LPC2141	192Kb / 40P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 04-17 November 2008
	LPC2365FBD100	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013
	LPC2141	189Kb / 39P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 03-19 October 2007
	LPC2364FET100	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013
	LPC2364	225Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 October 2007
	LPC2364	1Mb / 48P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-22 September 2006
	LPC2364	983Kb / 59P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 06-1 February 2010
	LPC2378	253Kb / 54P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-6 December 2006

More results

LPC2141FBD64 Datasheet(PDF) 1 Page - NXP Semiconductors

LPC2141FBD64 Datasheet(HTML) 1 Page - NXP Semiconductors

Similar Part No. - LPC2141FBD64

Similar Description - LPC2141FBD64

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Datasheet Download

Link URL