Electronic Components Datasheet Search |
|
LPC2142 Datasheet(PDF) 10 Page - NXP Semiconductors |
|
LPC2142 Datasheet(HTML) 10 Page - NXP Semiconductors |
10 / 45 page LPC2141_42_44_46_48 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 5 — 12 August 2011 10 of 45 NXP Semiconductors LPC2141/42/44/46/48 Single-chip 16-bit/32-bit microcontrollers P0.29/AD0.2/ CAP0.3/MAT0.3 14[4] I/O P0.29 — General purpose input/output digital pin (GPIO). I AD0.2 — ADC 0, input 2. I CAP0.3 — Capture input for Timer 0, channel 3. O MAT0.3 — Match output for Timer 0, channel 3. P0.30/AD0.3/ EINT3/CAP0.0 15[4] I/O P0.30 — General purpose input/output digital pin (GPIO). I AD0.3 — ADC 0, input 3. I EINT3 — External interrupt 3 input. I CAP0.0 — Capture input for Timer 0, channel 0. P0.31/UP_LED/ CONNECT 17[6] O P0.31 — General purpose output only digital pin (GPO). O UP_LED — USB GoodLink LED indicator. It is LOW when device is configured (non-control endpoints enabled). It is HIGH when the device is not configured or during global suspend. O CONNECT — Signal used to switch an external 1.5 k resistor under the software control. Used with the SoftConnect USB feature. Important: This is an digital output only pin. This pin MUST NOT be externally pulled LOW when RESET pin is LOW or the JTAG port will be disabled. P1.0 to P1.31 I/O Port 1: Port 1 is a 32-bit bidirectional I/O port with individual direction controls for each bit. The operation of port 1 pins depends upon the pin function selected via the pin connect block. Pins 0 through 15 of port 1 are not available. P1.16/ TRACEPKT0 16[6] I/O P1.16 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O TRACEPKT0 — Trace Packet, bit 0. P1.17/ TRACEPKT1 12[6] I/O P1.17 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O TRACEPKT1 — Trace Packet, bit 1. P1.18/ TRACEPKT2 8[6] I/O P1.18 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O TRACEPKT2 — Trace Packet, bit 2. P1.19/ TRACEPKT3 4[6] I/O P1.19 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O TRACEPKT3 — Trace Packet, bit 3. P1.20/ TRACESYNC 48[6] I/O P1.20 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O TRACESYNC — Trace Synchronization. Note: LOW on this pin while RESET is LOW enables pins P1.25:16 to operate as Trace port after reset. P1.21/ PIPESTAT0 44[6] I/O P1.21 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O PIPESTAT0 — Pipeline Status, bit 0. P1.22/ PIPESTAT1 40[6] I/O P1.22 — General purpose input/output digital pin (GPIO). Standard I/O port with internal pull-up. O PIPESTAT1 — Pipeline Status, bit 1. Table 3. Pin description …continued Symbol Pin Type Description |
Similar Part No. - LPC2142 |
|
Similar Description - LPC2142 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |