Electronic Components Datasheet Search |
|
CBC-EVAL-08 Datasheet(PDF) 2 Page - Cymbet Corporation |
|
CBC-EVAL-08 Datasheet(HTML) 2 Page - Cymbet Corporation |
2 / 11 page EnerChip Solar Energy Harvesting Demo Kit ©2009 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-08 Rev18 Page 2 of 11 J1 Connector for User Pin Number(s) Designation 1 BATOFF 2 GND 3 Not Connected 4 Not Connected 5 V OUT2 6 CHARGE Connector Type: Rt. Angle SIP J1 J5 J8 Connector Pin Number(s) Designation 1 Positive input 2 GND Connector Type: Trace Vias J5 Connector for User Pin Number(s) Designation 1 CHARGE 2 BATOFF 3 V BAT 4 GND 5 V OUT2 Connector Type: Vertical SIP 1 1 CBC-EVAL-08 Module Connectors EnerChip EH 5300 Module Solar Panel J7 Connector Pin Number(s) Description 1 Cut Trace to use external source Connector Type: Circular pad and trace J7 J8 PT1 PT1 Connector Pin Number(s) Designation 1 Piezo input 1 2 Piezo input 2 Connector Type: Trace Vias EVAL-08 Module Connector Explanations J1 Connector - Power and handshaking signals for connection to a target board - e.g. wireless end-point module. (For reference, header connector J1 is Mill-Max p/n 850-10-006-20-001000; the socket it mates to is Mill-Max p/n 851-93-006-20-001000.) J5 Connector - Power and handshaking signal pins for connection to a target board - e.g. wireless end-point module. (For reference, header connector J5 is a 5-pin section of Samtec 50-pin header p/n TSW-150-07-G-S. J7 Connector - This trace is to be cut if an alternate solar panel is to be connected to J8. J8 Jumper and Shunt - This connector ships with the shunt installed to protect the EH module. The shunt is removed before CBC-EVAL-08 is charged for the first time. This connector can also be used to connect an alternate solar panel to CBC-EVAL-08. PT1 Connector - An alternate piezoelectric (or other AC) energy harvesting transducer can be connected. It can be connected in parallel with the CBC-EVAL-08 solar panel by leaving J7 intact. Or, the piezoelectric transducer can be used stand-alone by cutting the J7 trace. Cable Assembly - A 5-conductor cable with a header connector at each end is provided with CBC-EVAL-08 to facilitate connection between the J5 connector and a 5-pin header on the user’s board. Figure 3: EnerChip EVAL-08 Connections The CBC-EVAL-08 and CBC5300 modules are sensitive to electrostatic discharge (ESD) and must be handled accordingly. In cases where the CBC-EVAL-08 or CBC5300 modules are removed from their original packaging, it is a requirement to maintain the same type of anti-static, non- conductive packaging to prevent discharge of the on-board EnerChips. Do not store the CBC-EVAL-08 or CBC5300 modules in conductive black foam, as it will discharge and destroy the EnerChips on the CBC5300 module. |
Similar Part No. - CBC-EVAL-08 |
|
Similar Description - CBC-EVAL-08 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |