PROTEKTIVE PAK

13520 MONTE VISTA AVENUE, CHINO, CA 91710

PHONE (909) 627-2578, FAX (909) 363-7331

ProtektivePak.com

DRAWING NUMBER

57000

DATE:

April

2010

© 2010 DESCO INDUSTRIES INC.

Employee Owned

Conductive Hinged Box with Foam

Description:

As required by ANSI/ESD S20.20 Packaging standard ANSI/ESD S541 these

conductive boxes are marked with the ESD protective symbol. They contain one

piece of high density foam for insertion of component leads and one piece of low

density foam which acts as a cushioning material.

57000 has only 1 piece of foam, all other sizes have 2 pieces of foam.

*Low density foam not included in item 57000

Made in America

Properties:

Material:

Black conductive polypropylene

Resistance:

Less than 1 x10E5 ohms

(per ANSI EOS/ESD S11.11)

Size Tolerance:

± 1/32"

Temperature Limits:

0° to 120° F

Hinge:

Molded one-piece (57000-57006),

Pin two-piece (57008-57012)

Closure:

Snap

Top Foam:

1/4" (.25", 6mm) thick low density foam

Bottom Foam:

1/4" (.25", 6mm) thick high density foam

ITEM NO.

*

SIZE - MM

SIZE - INCHES

57000

33 x 33 x 12

1.3 x 1.3 x 0.46

57002

73 x 51 x 16

2.9 x 2 x 0.63

57004

90 x 64 x 16

3.5 x 2.5 x 0.63

57006

107 x 82 x 13

4.2 x 3.2 x 0.52

57010

229 x 126 x 21

9 x 5 x 0.81

57008

229 x 126 x 30

9 x 5 x 1.19

57012

229 x 126 x 40

9 x 5 x 1.58

INSIDE DIMENSIONS WITHOUT FOAM

* All boxes have the ESD Protective Symbol molded into them.

Specifications and procedures subject to change without notice

ANSI/ESD S541 section 6.1 Inside an EPA “Packaging used within an EPA (that

satisfies the minimum requirements of ANSI/ESD S20.20) shall be:

1. Low charge generation.

2. Dissipative or conductive materials for intimate contact.”

ANSI/ESD S541 section 7.2.2 Resistance of Dissipative Materials “A static

dissipative material shall have a surface resistance of greater than or equal to

1.0 x 10^4 Ohms but less than 1.0 x 10^11 Ohms. Packaging materials that are

in intimate contact with devices should be dissipative.”