Electronic Components Datasheet Search |
|
ACPL-H342-000E Datasheet(PDF) 1 Page - AVAGO TECHNOLOGIES LIMITED |
|
ACPL-H342-000E Datasheet(HTML) 1 Page - AVAGO TECHNOLOGIES LIMITED |
1 / 19 page ACPL-H342 and ACPL-K342 2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8 Data Sheet CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and high peak output current supplied by this optocoupler make it ideally suited for direct driving IGBT with ratings up to 1200V/150A. For IGBTs with higher ratings, the ACPL-H342/ACPL-K342 can be used to drive a discrete power stage which drives the IGBT gate.The ACPL-H342 and ACPL-K342 have the highest insulation voltage of VIORM = 891Vpeak and 1140Vpeak respectively in the IEC/ EN/DIN EN 60747-5-5. Functional Diagram Features • 2.5 A Maximum Peak Output Current • 2.0A Minimum Peak Output Current • Built-in Active Miller Clamp • Rail-to-Rail Output Voltage • Fast Propagation Delay to minimize Dead Time • tPHL < tPLH to provide“Anti-Cross”Conduction • LED input threshold current hysteresis • ICC = 2.5 mA Maximum Supply Current to allow boot- strap power supply • Under Voltage Lock-Out Protection (UVLO) with Hysteresis • 40 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V • Wide Operating VCC Range: 15 to 30 Volts • Industrial Temperature Range: -40°C to 105°C • Safety Approval: – UL Recognized 3750/5000 VRMS for 1min. – CSA – IEC/EN/DIN EN 60747-5-5 VIORM = 891/1140 Vpeak Applications • IGBT/MOSFET Gate Drive • AC and Brushless DC Motor Drives • Renewable Energy Inverters • Industrial Inverters • Switching Power Supplies VCC VOUT VCLAMP VEE 1 2 3 4 8 7 6 5 CATHODE NC ANODE NC VCLAMP V CLAMP Note: Design Note: A 1 µF bypass capacitor must be connected between pins VCC and VEE. Truth Table LED VCC – VEE “POSITIVE GOING” (i.e., TURN-ON) VCC – VEE “NEGATIVE GOING” (i.e., TURN-OFF) VO VCLAMP OFF 0 – 30V 0 – 30V LOW LOW ON 0 – 11V 0 – 9.5V LOW LOW ON 11 – 13.5V 9.5 – 12V TRANSITION TRANSITION ON 13.5 – 30V 12 – 30V HIGH Hi-Z Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product |
Similar Part No. - ACPL-H342-000E |
|
Similar Description - ACPL-H342-000E |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |