P89LPC972FDH datasheet(9/67 Pages) NXP

Part #	P89LPC972FDH

Description	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash

Download	67 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

9 / 67 page

P89LPC97X

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 8 June 2010

9 of 66

NXP Semiconductors

P89LPC970/971/972

8-bit microcontroller with accelerated two-clock 80C51 core

[1]

Input/output for P1.0 to P1.4, P1.6, P1.7. Input for P1.5.

P1.7/T3EX/MOSI

2

I/O

P1.7 — Port 1 bit 7. High current source.

I

T3EX — Timer/counter 3 external capture input.

I/O

MOSI — SPI master out slave in. When configured as master, this pin is output;

when configured as slave, this pin is input (pin remap).

P3.0 to P3.1

I/O

Port 3: Port 3 is a 2-bit I/O port with a user-configurable output type. During reset

Port 3 latches are configured in the input-only mode with the internal pull-up

disabled. The operation of Port 3 pins as inputs and outputs depends upon the port

configuration selected. Each port pin is configured independently. Refer to Section

7.16.1 “Port configurations” and Table 11 “Static characteristics” for details.

All pins have Schmitt trigger inputs.

Port 3 also provides various special functions as described below:

P3.0/XTAL2/

CLKOUT

7I/O

P3.0 — Port 3 bit 0.

O

XTAL2 — Output from the oscillator amplifier (when a crystal oscillator option is

selected via the flash configuration.

O

CLKOUT — CPU clock divided by 2 when enabled via SFR bit (ENCLK -TRIM.6).

It can be used if the CPU clock is the internal RC oscillator, watchdog oscillator or

external clock input, except when XTAL1/XTAL2 are used to generate clock source

for the RTC/system timer.

P3.1/XTAL1

6

I/O

P3.1 — Port 3 bit 1.

I

XTAL1 — Input to the oscillator circuit and internal clock generator circuits (when

selected via the flash configuration). It can be a port pin if internal RC oscillator or

watchdog oscillator is used as the CPU clock source, and if XTAL1/XTAL2 are not

used to generate the clock for the RTC/system timer.

VSS

5I

Ground: 0 V reference.

VDD

15

I

Power supply: This is the power supply voltage for normal operation as well as

Idle and Power-down modes.

Table 3.

Pin description …continued

Symbol

Type

Description

DIP20,

TSSOP20

Similar Part No. - P89LPC972FDH

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	P89LPC972FDH	459Kb / 66P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash Rev. 02-27 April 2010

More results

Similar Description - P89LPC972FDH

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	P89LPC970	459Kb / 66P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash Rev. 02-27 April 2010
	P89LPC9301	312Kb / 65P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB 3 V byte-erasable flash Rev. 01-9 April 2009
	P89LPC980	560Kb / 85P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB wide-voltage byte-erasable flash with 10-bit ADC Rev. 02-8 February 2010
	P89LPC9201	335Kb / 74P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB 3 V byte-erasable flash with 8-bit ADC Rev. 01-16 April 2009
	P89LPC9331	650Kb / 94P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB/16 kB 3 V byte-erasable Rev. 5-10 January 2011
	P89LPC92X1	1Mb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB 3 V byte-erasable flash with 8-bit ADC Rev. 2-1 December 2010
	P89LPC933	366Kb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs Rev. 07-26 November 2008
	P89LPC9331	433Kb / 93P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs Rev. 03-2 June 2009
	P89LPC933	372Kb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB/16 kB 3 V byte-erasable Flash with 8-bit ADCs Rev. 06-20 June 2005
	P89LPC952	339Kb / 69P	8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/16 kB 3 V byte-erasable flash with 10-bit ADC Rev. 04-24 July 2008

More results

P89LPC972FDH Datasheet(PDF) 9 Page - NXP Semiconductors

P89LPC972FDH Datasheet(HTML) 9 Page - NXP Semiconductors

Similar Part No. - P89LPC972FDH

Similar Description - P89LPC972FDH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL