○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.

1/17

TSZ02201-0R6R0A600060-1-2

© 2013 ROHM Co., Ltd. All rights reserved.

www.rohm.com

TSZ22111･14･001

17.Jan.2013 Rev.002

Datasheet

1A Variable Output

LDO Regulator

BD00HC0WEFJ

●General Description

BD00HC0WEFJ is a LDO regulator with output current 1.0A. The output accuracy is ±1% of the output voltage. The output

voltage of the variable output voltage device can be varied from 0.8 to 7.0V using external resistors. It has a package type:

HTSOP-J8 (4.90mm x 6.00mm x 1.00mm), and can be used in a wide variety of digital appliances. The device has built in

over current protection to protect the device when output is shorted, 0µA shutdown mode and thermal shutdown circuit to

protect the device during over load conditions. The LDO regulator is usable with ceramic capacitors that enable a smaller

layout and longer life.

●Features

■ +/-1% output voltage accuracy

■ Built-in Over Current Protection circuit (OCP)

■ Built-in Thermal Shut Down circuit (TSD)

■ Zero µA Shutdown mode

●Key Specifications

Input Power Supply Voltage range:

4.5V to 8.0V

Output voltage range:

0.8V to 7.0V

Output current:

1.0A (Max.)

Shutdown current:

0

μA(Typ.)

Operating temperature range:

-25℃ to +85℃

●Typical Application Circuit

●Package

(Typ.)

(Typ.)

(Max.)

HTSOP-J8

4.90mm x 6.00mm x 1.00mm

●Ordering Information

B

D

0

0

H

C

0

W

E

F

J

-

E 2

Part

Number

Output

voltage

00 : Variable

Input

voltage

range

H:10V

Output

current

C0:1.0A

Shutdown

mode

“W”：Included

Package

EFJ：HTSOP-J8

Packaging and forming specification

E2:Emboss tape reel

HTSOP-J8

EN

GND

FIN

FB

Capacitor