Electronic Components Datasheet Search |
|
C470RT200-SXXXX Datasheet(PDF) 2 Page - Cree, Inc |
|
C470RT200-SXXXX Datasheet(HTML) 2 Page - Cree, Inc |
2 / 6 page Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, G•SiC and RazerThin are registered trademarks of Cree, Inc. 2 CPR3DS Rev. - Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Maximum Ratings at T A = 25°C Notes &3 CxxxRT200-Sxxxx DC Forward Current 30 mA Peak Forward Current (1/10 duty cycle @ 1kHz) 100 mA LED Junction Temperature 125°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge Threshold (HBM) Note 2 1000 V Electrostatic Discharge Classification (MIL-STD-883E) Note 2 Class 2 Typical Electrical/Optical Characteristics at T A = 25°C, IF = 5 mA Note 3 Part Number Forward Voltage (V f, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max. ( λ D, nm) Min. Typ. Max. Max. Typ. C460RT200-Sxxxx 2.7 3.0 3.3 1 24 C470RT200-Sxxxx 2.7 3.0 3.3 1 25 C527RT200-Sxxxx 2.7 3.1 3.4 1 40 Mechanical Specifications CxxxRT200-Sxxxx Description Dimension Tolerance P-N Junction Area (μm) 150 x 150 ± 35 Top Area (μm) 200 x 200 ± 35 Bottom Area (μm) 170 x 170 ± 35 Chip Thickness (μm) 95 ± 15 Au Bond Pad Diameter (μm) 112 ± 20 Au Bond Pad Thickness (μm) 1.0 ± 0.5 Back Contact Metal Width (μm) 90 ± 10 Notes: Maximum ratings are package dependent. The above ratings were determined using a T-1 3/4 package (with Hysol OS4000 epoxy) for characterization. Seller makes no representations regarding ratings for packages other than the T-1 3/4 package used by Seller. The forward currents (DC and Peak) are not limited by the G•SiC die but by the effect of the LED junction temperature on the package. The junction temperature limit of 125°C is a limit of the T-1 3/4 package; junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). Product resistance to electrostatic discharge (ESD) is measured by simulating ESD using a rapid avalanche energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown. Seller gives no other assurances regarding the ability of Products to withstand ESD. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 5 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are the average values expected by Seller in large quantities and are provided for information only. Seller gives no assurances products shipped will exhibit such typical ratings. All measurements were made using lamps in T-1 3/4 packages (with Hysol OS4000 epoxy). Dominant wavelength measurements taken using Illuminance E. Specifications are subject to change without notice. 1. 2. 3. 4. |
Similar Part No. - C470RT200-SXXXX |
|
Similar Description - C470RT200-SXXXX |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |