Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF HTML

HFBR-772BHWZ Datasheet(PDF) 4 Page - AVAGO TECHNOLOGIES LIMITED

Part No. HFBR-772BHWZ
Description  Pluggable Parallel Fiber Optic Modules, Transmitter and Receiver Low cost per Gb/s
Download  25 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  AVAGO [AVAGO TECHNOLOGIES LIMITED]
Homepage  http://www.avagotech.com
Logo 

HFBR-772BHWZ Datasheet(HTML) 4 Page - AVAGO TECHNOLOGIES LIMITED

 
Zoom Inzoom in Zoom Outzoom out
 4 / 25 page
background image
4
Electromagnetic Interference (EMI)
Many equipment designs using these high-data-rate
modules will be required to meet the requirements of
the FCC in the United States, CENELEC in Europe and
VCCI in Japan. These modules, with their shielded design,
perform to the levels detailed in the Regulatory Compli-
ance Table. The performance detailed in the Regulatory
Compliance Table is intended to assist the equipment de-
signer in the management of the overall equipment EMI
performance. However, system margins are dependent
on the customer board and chassis design.
Immunity
Equipment using these modules will be subject to radio
frequency electromagnetic fields in some environ-
ments. These modules have good immunity due to their
shielded designs. See the Regulatory Compliance Table
for further detail.
Eye Safety
These 850 nm VCSEL-based modules provide eye safety
by design. The HFBR-772BWZ has been registered with
CDRH and certified by TUV as a Class 1M device under
Amendment 2 of IEC 60825-1. See the Regulatory Com-
pliance Table for further detail. If Class 1M exposure is
possible, a safety-warning label should be placed on the
product stating the following:
LASER RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Connector Cleaning
The optical connector used is the MTP® (MPO). The opti-
cal ports have recessed optics that are visible through
the nose of the ports. The provided port plug should
be installed any time a fiber cable is not connected. The
port plug ensures the optics remain clean and no clean-
ing should be necessary. In the event the optics become
contaminated, forced nitrogen or clean dry air at less
than 20 psi is the recommended cleaning agent. The
optical port features, including guide pins, preclude use
of any solid instrument. Liquids are not advised due to
potential damage.
Process Plug
Each parallel optics module is supplied with an inserted
process plug for protection of the optical ports within the
MTP® (MPO) connector receptacle.
Handling Precautions
The HFBR-772BWZ and HFBR-782BZ can be damaged by
current surges and overvoltage conditions. Power supply
transient precautions should be taken. Application of
wave soldering, reflow soldering and/or aqueous wash
processes with the parallel optic device on board is not
recommended as damage may occur.
Normal handling precautions for electrostatic sensitive
devices should be taken (see ESD section).
The HFBR-772BWZ is a Class 1M laser product.
DO NOT VIEW RADIATION DIRECTLY WITH OPTICAL IN-
STRUMENTS.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn