8

Measured at 100 V DC

150 V AC applied for one minute

Measured at 100 mA

Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10

cycles each

waveform, for 3 cycles in the both directions of each of the 3 axes

Temperature: -55ç ¡ 15 to 35ç ¡ 85ç ¡ 15 to 35ç

Time: 30 min. ¡ 2 to 3 min. ¡ 30 min. ¡ 2 to 3 min. for 5 cycles

Reflow: At the recommended temperature profile

Soldering iron temperature: 360ç for 5 seconds

Temperature of 40ç, humidity of 90 to 95%, duration 96 h

50 times

No flashover or breakdown

No electrical discontinuity for 1µs min

No damage, cracks, or parts looseness

No electrical discontinuity for 1µs min

No damage, cracks, or parts looseness

No damage, cracks, or parts looseness

No melting of resin portion which affects performance

sGeneral Product Specifications

Item

Requirements

Conditions

Note 1: Includes temperature rise caused by current flow.

Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.

The operating temperature and humidity range are suited to the non-conducting condition following board assembly.

Note 3: Information contained in this catalog represents general requirements for this series. Contact us for the drawings and specifications for a

specific part number shown.

Rating

Rated voltage

Rated current

50 V AC

0.3 A

Operating humidity range

Operating temperature range

Relative humidity 95% max

(No condensation)

-55 to 85ç (Note 1)

Storage humidity range

Storage temperature range

40 to 70% (Note 2)

-10 to +60ç (Note 2)

1. Insulation resistance

2. Voltage resistance

3. Contact resistance

4. Vibration

5. Shock

6. Damp heat

(Steady state)

8. Durability

9. Resistance to

soldering heat

7. Temperature cycle

sOrdering Information

F

FX

X1

10

0 #

# - ✽ P

P // ✽ - S

SV

V 1

1 ((✽ ✽))

1

2

7

3

4

5

6

sMaterials

Part

Material

Process

Notes

Insulator

Contacts

Ground plate

Metal fitting

LCP

Phosphor bronze

Phosphor bronze

Phosphor bronze

Beige

Header

Contact Area: Gold plating

Lead Area: Tin plating

Receptacle

Contact Area: Gold plating

Lead Area: Flash plating

Tin plating

Tin plating

UL94V-0

---

---

---

Series name : FX10

Form symbol

A : With guide post

B : Without guide post

Number of contacts

Signal/Ground: 80/8, 100/10, 120/12,

140/14

Signal: 96, 120, 144, 168

Connector type

P : Header

S : Receptacle

Contact form

SV : Straight SMT

Product height

Blank : Standard

1

: Standard + 1mm

Packaging classification

Blank, (71) : Tray packaging

(21), (91) : Embossed tape packaging

3

5

4

6

7

1

2

With ground plate

Without ground plate