Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

RC2012J000CS Datasheet(PDF) 18 Page - Samsung semiconductor

Part No. RC2012J000CS
Description  Thick Film Chip Resistor ( General )
Download  19 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  SAMSUNG [Samsung semiconductor]
Homepage  http://www.samsung.com/Products/Semiconductor
Logo 

RC2012J000CS Datasheet(HTML) 18 Page - Samsung semiconductor

 
Zoom Inzoom in Zoom Outzoom out
 18 / 19 page
background image
MOUNTING
Our products have Ag electrodes protected by double layer.
1st Ni Coating
- This prevents Ag electrode from leaching and enhance the bonding with Sn
2nd Sn Coating
- This is made of Sn 100% with melting point 232℃ to prevent it from melting when solder
cream melts, and to enhance the bonding.
- Commercial solder creams are made of Sn-3.0Ag-0.5Cu with melting point 217℃.
CLEANING
CAUTION FOR CHIP RESISTOR SEPERATION FROM PCB
OTHERS
Proper nozzle height must be given attention so as not to give excessive pressure on the
chip during mounting on the PCB.
(Excessive pressure may cause exterior damage, change in resistance, circuit open, etc.)
If rosin flux is used, cleaning usually is unnecessary. When strongly activated flux is used, chlorine in the
flux may dissolve into some types of cleaning fluids, thereby affecting the chip capacitors.
This means that the cleaning fluid must be carefully selected, and should always be new.
PCB can be prevented from a shock because it has flexibility, but Chip resistor cannot : it is made of
ceramic, solder and metal.
Therefore, when separating Chip resistor from PCB, it is important for a chip not to be cracked.
Manual work
Manual soldering can pose a great risk of creating thermal cracks in chip resistors.
The hot soldering iron tip comes into direct contact with the end terminations, an operator's
carelessness may cause the tip of the soldering iron to come into direct contact with the
ceramic body of the resistor.
Therefore the soldering iron must be handled carefully, and close attention must be paid
to the selection of the soldering iron tip and to temperature control of the tip.
Do not use more than rated voltage.(check the contents on the file)
SOLDERING


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn