AD7490BCPZ-REEL7 datasheet(21/28 Pages) AD

Part #	AD7490BCPZ-REEL7

Description	16-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 28-Lead TSSOP

Download	28 Pages

Scroll/Zoom	100%

Manufacturer	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

21 / 28 page

Data Sheet

AD7490

Rev. D | Page 21 of 28

Powering Up the AD7490

When supplies are first applied to the AD7490, the ADC may

power up in any of the operating modes of the part. To ensure

that the part is placed into the required operating mode, the

user should perform a dummy cycle operation, as outlined in

Figure 26.

The three dummy conversion operations outlined in Figure 26

must be performed to place the part into either of the auto modes.

The first two conversions of this dummy cycle operation are

performed with the DIN line tied high, and for the third conver-

sion of the dummy cycle operation, the user should write the

desired control register configuration to the AD7490 to place

the part into the required auto mode. On the third CS rising

edge after the supplies are applied, the control register contains

the correct information and valid data results from the next

conversion.

Therefore, to ensure the part is placed into the correct operating

mode when supplies are first applied to the AD7490, the user

must first issue two serial write operations with the DIN line

tied high. On the third conversion cycle, the user can then write

to the control register to place the part into any of the operating

modes. The user should not write to the Shadow register until

the fourth conversion cycle after the supplies are applied to

the ADC to guarantee that the control register contains the

correct data.

If the user wishes to place the part into either normal mode or

full shutdown mode, the second dummy cycle with DIN tied

high can be omitted from the three dummy conversion

operation outlined in Figure 26.

SCLK

1

12

16

1

12

16

1

12

16

DOUT

DIN

CS

DUMMY CONVERSION

CORRECT VALUE IN CONTROL

REGISTER VALID DATA FROM

NEXT CONVERSION USER CAN

WRITE TO SHADOW REGISTER

IN NEXT CONVERSION

INVALID DATA

DATA IN TO CONTROL

CONTROL REGISTER IS LOADED ON THE

FIRST 12 CLOCK EDGES

KEEP DIN LINE TIED HIGH FOR FIRST TWO DUMMY CONVERSIONS

Figure 26. Placing into the Required Operating Mode After Supplies Are Applied

Similar Part No. - AD7490BCPZ-REEL7

Manufacturer	Part #	Datasheet	Description
Analog Devices	AD7490BCPZ-REEL7	748Kb / 29P	16-Channel, 1 MSPS, 12-Bit ADC

More results

Similar Description - AD7490BCPZ-REEL7

Manufacturer	Part #	Datasheet	Description
Analog Devices	AD7490	950Kb / 29P	16-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 28-Lead TSSOP REV. D
Analog Devices	AD7490	2Mb / 24P	16-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 28-Lead TSSOP REV. A
ams AG	AS1542	78Kb / 2P	16-Channel, 1 Msps, 12-Bit ADC with Sequencer
Analog Devices	AD7914	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7924	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7924BRUZ	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7904	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7904	411Kb / 24P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. 0
	AD7923	381Kb / 24P	4-Channel, 200 kSPS 12-Bit ADC with Sequencer in 16-Lead TSSOP REV. D
	AD7923	380Kb / 24P	4-Channel, 200 kSPS 12-Bit ADC with Sequencer in 16-Lead TSSOP REV. C

More results

AD7490BCPZ-REEL7 Datasheet(PDF) 21 Page - Analog Devices

AD7490BCPZ-REEL7 Datasheet(HTML) 21 Page - Analog Devices

Similar Part No. - AD7490BCPZ-REEL7

Similar Description - AD7490BCPZ-REEL7

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL