S8JXG30024C datasheet(9/59 Pages) OMRON

Electronic Components Datasheet Search

S8JXG30024C Datasheet(PDF) 9 Page - Omron Electronics LLC

9 / 59 page

S8JX

*1. When a load is connected that has a built-in DC-DC converter, the overload protection may operate at startup and the Power Supply may not

start. Refer to Overload Protection on page 19.

*2. Do not use an Inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal

temperature of the Power Supply may result in ignition or burning.

*3. Rated input voltage: 100 or 200 VAC at 100% load.

*4. Output characteristics: Specified at power supply output terminals.

*5. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than the allowable voltage range. When adjusting the output

voltage, confirm the actual output voltage from the Power Supply and be sure that load is not damaged.

*6. Measurement methods are based on JEITA standard RC-9131A. Refer to Ripple Noise Voltage on page 55.

*7. For details, refer to Overload Protection on page 19.

*8. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.

*9. The weight indicated is for Front-mounting Power Supply.

*10.The protection-ON alarm indicator will light as soon as the output is interrupted. For resetting, turn OFF the input power, leave for more than

three minutes , and then turn it back ON again.

*11.Noise values depend on the wiring methods and other factors. Insert noise filters and cores in the input and output lines.

300 W, 5 V: Two E04SR401938 (manufactured by SEIWA) on the output line.

300 W, 12 V: One E04SR401938 (manufactured by SEIWA) on the output line.

600 W, 5 V or 12 V: One FN2450G-16-61 (manufactured by Schaffner) on the input line.

One E04RC613620 (manufactured by SEIWA) on the output line.

*12.For the 600-W, 5-V and 12-V models, class A compliance was met with an aluminum plate placed under the Power Supply.

*13.The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Manufacturer	Part #	Datasheet	Description
Omron Electronics LLC	S8JX	2Mb / 28P	Switch Mode Power Supply
	S8JX-G	486Kb / 4P	Offers Flexible Selection, High Reliability and Ease of Operation
	S8JX-G01505	2Mb / 28P	Switch Mode Power Supply
	S8JX-G01505	486Kb / 4P	Offers Flexible Selection, High Reliability and Ease of Operation
	S8JX-G01505	2Mb / 28P	Wide Variety of Output Voltage Variations: 48 V for 15 to 150 W, and 5 or 12 V for 150 W

Privacy Policy
ALLDATASHEET.COM

ALLDATASHEET.COM

Does ALLDATASHEET help your business so far? [ DONATE ]
About Alldatasheet \| Advertisement \| Datasheet Upload \| Contact us \| Privacy Policy \| Link Exchange \| Manufacturer List All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

Does ALLDATASHEET help your business so far? [ DONATE ]

Family Site : ic2ic.com | icmetro.com