US

UK

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

© Coilcraft Inc. 2012

This product may not be used in medical of high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check out web site for latest information.

HIGH TEMPERA

TURE

ShieldedPowerInductors– XAL1060

Document 812-1

Document 812-1 Revised 07/25/12

±20% (µH)

typ

max

(MHz)

(A)

20°C rise 40°C rise

XAL1060-181ME_

0.18

0.50

0.55

68

>100

28.8

46.0

XAL1060-401ME_

0.40

0.80

0.88

60

82

25.9

36.8

XAL1060-681ME_

0.68

1.35

1.50

51

52

22.4

33.9

XAL1060-122ME_

1.2

2.50

2.75

44

43

17.9

26.3

XAL1060-152ME_

1.5

3.00

3.30

36

36

16.0

24.4

XAL1060-222ME_

2.2

4.50

4.95

25

32

13.9

20.0

XAL1060-332ME_

3.3

7.20

7.92

19

26

11.2

16.8

XAL1060-472ME_

4.7

9.75

10.72

16

25

8.5

14.0

1. When ordering, please specify

packaging code:

XAL1060-152MEC

Packaging: C = 7

″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel).

B = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use code letter C instead.

D = 13

″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

(750 parts per full reel).

2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.

3. DCR measured on a micro-ohmmeter.

4. SRF measured using Agilent/HP 4395A or equivalent.

5. DC current at which the inductance drops 30% (typ) from its value without current.

6. Current that causes the specified temperature rise from 25°C ambient.

7. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kit C435 contains 3 of each XAL1060 and XAL1010 value

Core material Composite

Environmental RoHS compliant, halogen free

Terminations RoHS compliant tin-silver (96.5/3.5) over copper.

Other terminations available at additional cost.

Weight 3.6 – 3.8 g

Ambient temperature –40°C to +125°C with Irms current, +125°C

to +165°C with derated current.

Storage temperature Component: –40°C to +165°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 150/7

″reel; 600/13″ reel Plastic tape: 24 mm wide,

0.3 mm thick, 16 mm pocket spacing, 6.3 mm pocket depth

PCB washing Only pure water or alcohol recommended

• Excellent current handling – over 100 A

• Very low DCR – as low as 0.5 mOhm

• Soft saturation

Irms Testing

Irms testing was performed on

0.75 inch wide × 0.25 inch thick

copper traces in still air.

Temperature rise is highly

dependent on many factors

including pcb land pattern, trace

size, and proximity to other

components. Therefore temper-

ature rise should be verified in

application conditions.