Electronic Components Datasheet Search |
|
SPXD2010VLQ80R Datasheet(PDF) 10 Page - Freescale Semiconductor, Inc |
|
SPXD2010VLQ80R Datasheet(HTML) 10 Page - Freescale Semiconductor, Inc |
10 / 119 page PXS20 Microcontroller Data Sheet, Rev. 1 Preliminary—Subject to Change Without Notice Introduction Freescale Semiconductor 10 • ECC on 32-bit word (syndrome of 7 bits) — ECC covers SRAM bus address • 1-bit error correction, 2-bit error detection • Wait states: — 1 wait state at 120 MHz — 0 wait states at 80 MHz and 60 MHz 1.5.7 Platform Flash Memory Controller The following list summarizes the key features of the flash memory controller: • Single AHB port interface supports a 64-bit data bus. All AHB aligned and unaligned reads within the 32-bit container are supported. Only aligned word writes are supported. • Array interfaces support a 128-bit read data bus and a 64-bit write data bus for each bank. • Code flash (bank0) interface provides configurable read buffering and page prefetch support. — Four page-read buffers (each 128 bits wide) and a prefetch controller support speculative reading and optimized flash access. • Single-cycle read responses (0 AHB data-phase wait states) for hits in the buffers. The buffers implement a least-recently-used replacement algorithm to maximize performance. • Data flash (bank1) interface includes a 128-bit register to temporarily hold a single flash page. This logic supports single-cycle read responses (0 AHB data-phase wait states) for accesses that hit in the holding register. — No prefetch support is provided for this bank. • Programmable response for read-while-write sequences including support for stall-while-write, optional stall notification interrupt, optional flash operation abort , and optional abort notification interrupt. • Separate and independent configurable access timing (on a per bank basis) to support use across a wide range of platforms and frequencies. • Support of address-based read access timing for emulation of other memory types. • Support for reporting of single- and multi-bit error events. • Typical operating configuration loaded into programming model by system reset. The platform flash controller is replicated for each processor. 1.5.8 Platform Static RAM Controller (SRAMC) The SRAMC module is the platform SRAM array controller, with integrated error detection and correction. The main features of the SRAMC provide connectivity for the following interfaces: • XBAR Slave Port (64-bit data path) • ECSM (ECC Error Reporting, error injection and configuration) • SRAM array The following functions are implemented: • ECC encoding (32-bit boundary for data and complete address bus) • ECC decoding (32-bit boundary and entire address) • Address translation from the AHB protocol on the XBAR to the SRAM array The platform SRAM controller is replicated for each processor. |
Similar Part No. - SPXD2010VLQ80R |
|
Similar Description - SPXD2010VLQ80R |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |