Electronic Components Datasheet Search |
|
ST10F276E Datasheet(PDF) 1 Page - STMicroelectronics |
|
ST10F276E Datasheet(HTML) 1 Page - STMicroelectronics |
1 / 235 page This is information on a product in full production. August 2012 Doc ID 12303 Rev 3 1/235 1 ST10F276E 16-bit MCU with MAC unit 832 Kbyte Flash memory and 68 Kbyte RAM Datasheet − production data Features ■ Highly performance 16-bit CPU with DSP functions – 31.25ns instruction cycle time at 64MHz max CPU clock – Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator – Enhanced boolean bit manipulations – Single-cycle context switching support ■ On-chip memories – 512 Kbyte Flash memory (32-bit fetch) – 320 Kbyte extension Flash memory (16-bit fetch) – Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles – Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C) – 2 Kbyte internal RAM (IRAM) – 66 Kbyte extension RAM (XRAM) ■ External bus – Programmable external bus configuration & characteristics for different address ranges – 5 programmable chip-select signals – Hold-acknowledge bus arbitration support ■ Interrupt – 8-channel peripheral event controller for single cycle interrupt driven data transfer – 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns ■ Timers – 2 multi-functional general purpose timer units with 5 timers ■ Two 16-channel capture / compare units ■ 4-channel PWM unit + 4-channel XPWM ■ A/D converter – 24-channel 10-bit – 3 µs minimum conversion time ■ Serial channels – 2 synch. / asynch. serial channels – 2 high-speed synchronous channels –1 I2C standard interface ■ 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version) ■ Fail-safe protection – Programmable watchdog timer – Oscillator watchdog ■ On-chip bootstrap loader ■ Clock generation – On-chip PLL with 4 to 12 MHz oscillator – Direct or prescaled clock input ■ Real-time clock and 32 kHz on-chip oscillator ■ Up to 111 general purpose I/O lines – Individually programmable as input, output or special function – Programmable threshold (hysteresis) ■ Idle, power down and stand-by modes ■ Single voltage supply: 5V ±10% (embedded regulator for 1.8 V core supply) PQFP144 (28 x 28 x 3.4mm) (Plastic quad flat package) LQFP144 (20 x 20 x 1.4mm) (Low profile plastic quad flat package) www.st.com |
Similar Part No. - ST10F276E |
|
Similar Description - ST10F276E |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |