www.ti.com

DESCRIPTION/ORDERING INFORMATION (CONTINUED)

SN65LVDS179-EP

,, SN65LVDS180-EP

SN65LVDS050-EP, SN65LVDS051-EP

HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS

SGLS203B – SEPTEMBER 2003 – REVISED JANUARY 2007

The intended application of this device and signaling technique is for point-to-point baseband data transmission

over controlled impedance media of approximately 100-

Ω characteristic impedance. The transmission media

may be printed circuit board traces, backplanes, or cables. (Note: The ultimate rate and distance of data transfer

is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other

application specific characteristics.)

The devices offer various driver, receiver, and enabling combinations in industry standard footprints. Since these

devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not

put the differential outputs into a high-impedance state, but rather disconnects the input and reduces the

quiescent power used by the device. (For these functions with a high-impedance driver output, see the

SN65LVDM series of devices.) All devices are characterized for operation from –55

°C to 125°C.

PACKAGE

SMALL OUTLINE (DGK)

SMALL OUTLINE (PW)

SMALL OUTLINE (D)

-55

°C TO 125°C

SN65LVDS179MDGKREP

(1)

For the most current packaging and odering infomation, see the Package drawings, standard packing quantities, thermal data,

symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

(2)

Product Preview

2

Submit Documentation Feedback