www.ti.com
Evaluating Performance with the ADCPro Software
In addition, the Manual Control button (shown in Figure 20) can be used to enable or disable auto scan
modes 1 and 2. Auto 1 Mode allows the selection of any number of channels from the channel selection
list. Auto 2 Mode allows the selection of the highest channel to convert. All channels below this will be
converted once this selection is made by pressing the 'Accept Selection' button.
Figure 20. Manual Channel Control
21
SLAU262C
– January 2009 – Revised May 2011
ADS79xxEVM and ADS79xxEVM-PDK
Submit Documentation Feedback
Copyright
© 2009–2011, Texas Instruments Incorporated
English ▼
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
