P5CC008V1A_P5CC012V1A_FAM_SDS

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2012. All rights reserved.

Product short data sheet

COMPANY PUBLIC

Rev. 3 — 22 August 2012

195430

2 of 15

NXP Semiconductors

P5CC008V1A and P5CC012V1A

Secure contact PKI smart card controller

The contact interface availability enables the easy implementation of native or open

platform and multi-application operating systems in market segments such as banking,

E-passport, ID card, secure access, Java card as well as Trusted Platform Modules (TPM)

within extremely tiny SMD packages.

1.3 Naming conventions

1.4 Cryptographic hardware coprocessors

1.4.1 FameXE coprocessor

The security hardened and modular FameXE architecture supports the trend of increasing

RSA keys with faster execution speeds as well as Elliptic Curve Cryptography (ECC)

length of up to 8-kbit (up to 4-kbit with intermediate storage in RAM only).

The FameXE PKI coprocessor supports 192-bit ECC key length that offers the same level

executed in less than 30 ms providing a security level comparable to 1024-bit RSA. The

operand size for ECC, supported by FameXE, is only limited by the 2.5 KB size of the

FXRAM. FameXE is easy to use and the flexible interface provides programmers with the

freedom to implement their own cryptography solutions. A secure and CC EAL5+ certified

crypto library providing a large range of required functions will be available for all devices

in order to support customers in implementing public key-based solutions.

1.4.2 Triple-DES coprocessor

The DES widely used for symmetric encryption is supported by a dedicated, high

performance, highly attack-resistant hardware coprocessor. Single DES and Triple-DES,

based on two or three DES keys, can be executed within less than 40

s. Relevant

standards (ISO/IEC, ANSI, FIPS) and Message Authentication Code (MAC) are fully

supported.A secured and CC EAL5+ certified crypto library will be available for all devices

in order to support customers in implementing 3DES based solutions.

1.5 SmartMX interface

1.5.1 SmartMX contact interface

Operating in accordance with ISO/IEC 7816, the SmartMX contact interface is supported

by a built-in Universal Asynchronous Receiver/Transmitter (UART), which enables data

rates of up to 1 Mbit/s allowing for the automatic generation of all typical baud rates and

supports transmission protocols T=0 and T=1. An additional IO is available for proprietary

use.

Table 1.

Naming conventions

P5xyzzz SmartMX platform

x

Type of category:

C = PKI controller + Triple-DES coprocessor

S = Triple-DES coprocessor

y

Interface options:

C = contact interface - ISO/IEC 7816

zzz

Amount of non-volatile memory in KB, increasing count for further product options