Electronic Components Datasheet Search |
|
TLC59116FIPWR Datasheet(PDF) 1 Page - Texas Instruments |
|
|
TLC59116FIPWR Datasheet(HTML) 1 Page - Texas Instruments |
1 / 31 page TLC59116F www.ti.com SCLS714B – MARCH 2009 – REVISED JULY 2011 16-CHANNEL FAST-MODE PLUS I2C BUS LED DRIVER Check for Samples: TLC59116F 1 FEATURES • 16 LED Drivers (Each Output Programmable at • Software Reset Feature (SWRST Call) Allows OFF, ON, LED Brightness, and Group the Device to be Reset Through the I2C Bus Dimming/Blinking Mixed With Individual LED • Up to 14 Possible Hardware Adjustable Brightness) Individual I2C Bus Addresses Per Device so • 16 Open-Drain Output Channels That Each Device Can be Programmed • 256-Step (8-Bit) Linear Programmable • Output State Change Programmable on the Brightness Per LED Output Varying From Fully Acknowledge or the STOP Command to OFF (Default) to Maximum Brightness Using a Update Outputs Byte-by-Byte or All at the 97-kHz PWM Signal Same Time (Default to 'Change on STOP'). • 256-Step Group Brightness Control Allows • 120-mA Maximum Output Current General Dimming (Using a 190-Hz PWM Signal • 17-V Maximum Output Voltage From Fully OFF to Maximum Brightness • 25-MHz Internal Oscillator Requires No (Default) External Components • 256-Step Group Blinking With Frequency • 1-MHz Fast-Mode Plus (FM+) Compatible I2C Programmable From 24 Hz to 10.73 s and Duty Bus Interface With 30 mA High Drive Cycle from 0% to 99.6% Capability on SDA Output for Driving High • Four Hardware Address Pins Allow 14 Capacity Buses TLC59116F Devices to be Connected to the • Internal Power-On Reset Same I2C Bus • Noise Filter on SCL/SDA Inputs • Four Software-Programmable I2C Bus • No Glitch on Power Up Addresses (One LED Group Call Address and • Active-Low Reset Three LED Sub-Call Addresses) Allow Groups of Devices to be Addressed Simultaneously in • Supports Hot Insertion Any Combination (For example, One Register • Low Standby Current Used for 'All Call' So All the TLC59116Fs on • 3.3-V or 5-V Supply Voltage the I2C Bus Can be Addressed at the Same • 5.5-V Tolerant Inputs Time and the Second register Used for three • 28-Pin TSSOP (PW) different addresses so that 1/3 of all devices on the bus can be addressed at the same time • –40°C to 85°C Operation in a group). Software Enable and Disable for I2C Bus Address. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Copyright © 2009–2011, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. |
Similar Part No. - TLC59116FIPWR |
|
Similar Description - TLC59116FIPWR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |