SN74LV4053A-Q1

www.ti.com

SCLS521C

– AUGUST 2003 – REVISED JUNE 2011

ABSOLUTE MAXIMUM RATINGS

(1)

over operating free-air temperature range (unless otherwise noted)

Supply voltage range

–0.5 V to 7 V

–0.5 V to 7 V

Input clamp current

–20 mA

I/O diode current

–50 mA

Switch through current

±25 mA

±50 mA

D package

73

°C/W

PW package

108

°C/W

Storage temperature range

–65°C to 150°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3)

This value is limited to 5.5 V maximum.

(4)

The package thermal impedance is calculated in accordance with JESD 51-7.

RECOMMENDED OPERATING CONDITIONS

(1)

MIN

MAX

UNIT

Supply voltage

5.5

V

1.5

High-level input voltage,

V

control inputs

0.5

Low-level input voltage,

V

control inputs

Control input voltage

0

5.5

V

Input/output voltage

0

V

200

Δt/Δv

Input transition rise or fall rate

100

ns/V

20

SN74LV4053ATDRQ1,

Operating free-air temperature

–40

105

SN74LV4053ATPWRQ1

°C

Operating free-air temperature

SN74LV4053AQPWRQ1

–40

125

(1)

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

(2)

With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. It is recommended that only digital

signals be transmitted at these low supply voltages.

Copyright

© 2003–2011, Texas Instruments Incorporated

3