9162 Slide-In SIM Card Connector

Standard SMT Contact Layout

Narrow SMT Contact Layout

16.4 (0.646)

15.7

(0.618)

0.06

(0.002)

1.74

(0.069)

10.36

(0.408)

12.16

(0.479)

6.12 (0.241)

7.92 (0.312)

8.66 (0.341)

10.46 (0.412)

11.2 (0.441)

13.0 (0.512)

16.4 (0.646)

15.7

(0.618)

0.25

(0.010)

1.75

(0.069)

10.35

(0.407)

11.85

(0.467)

6.52 (0.257)

7.52 (0.296)

9.06 (0.357)

10.06 (0.396)

11.6 (0.457)

12.6 (0.496)

GENERAL DESCRIPTION

The standard SIM connector is specifically designed for handheld devices

requiring secure subscriber identification.

Following on from the introduction of our standard SIM block with an offering

of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding

another standard to the 9162 series SIM connectors, the slide-in SIM.

Unlike SIM blocks which require SIM card guides to aid insertion, removal and

retention of the SIM card, the slide-in SIM has guides as part of the connector

mold design.

Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles.

Our contact design is specifically rounded to avoid any possible damage

during and after card insertion to the card itself, assuming normal use. The

design also incorporates protection features to avoid contact damage during

this operation such as contact snagging.

Please contact the appropriate sales office for further details of this service.

KEY FEATURES AND BENEFITS

• Produced for use with mini SIM cards.

• The insulator is molded from high temperature plastic enabling the

connector to be used in convection or infrared soldering processes.

• Supplied on tape and reel packaging for pick and place assembly.

• The all plastic design, assuming normal use prevents damage to the

SIM card on insertion.

• Optional SMT contact size:

Standard SMT contact size – 1.60mm x 1.60mm

Narrow SMT contact size – 1.05mm x 0.60mm

• RoHS Compliant available.

17