Electronic Components Datasheet Search |
|
OPA835_1110 Datasheet(PDF) 3 Page - Texas Instruments |
|
OPA835_1110 Datasheet(HTML) 3 Page - Texas Instruments |
3 / 49 page OPA835 OPA2835 www.ti.com SLOS713D – JANUARY 2011 – REVISED OCTOBER 2011 SPECIFICATIONS: VS = 2.7 V Test conditions unless otherwise noted: VS+ = +2.7 V, VS– = 0 V, VOUT = 1 VPP, RF = 0 Ω, RL = 2 kΩ, G = 1 V/V, Input and Output Referenced to mid-supply. TA = 25°C. Unless otherwise noted TEST PARAMETER CONDITIONS MIN TYP MAX UNITS LEVEL(1) AC PERFORMANCE VOUT = 100 mVPP, G = 1 51 VOUT = 100 mVPP, G = 2 22.5 Small-signal bandwidth MHz C VOUT = 100 mVPP, G = 5 7.2 VOUT = 100 mVPP, G = 10 3 Gain-bandwidth product VOUT = 100 mVPP, G = 10 30 MHz C Large-signal bandwidth VOUT = 1 VPP, G = 1 24 MHz C Bandwidth for 0.1dB flatness VOUT = 1 VPP, G = 2 4 MHz C Slew rate, Rise/Fall 110/130 V/ µs C Rise/Fall time 9.5/9 ns C Settling time to 1%, Rise/Fall 35/30 ns C VOUT = 1VSTEP, G = 2 Settling time to 0.1%, Rise/Fall 60/65 ns C Settling time to 0.01%, Rise/Fall 120/90 ns C Overshoot/Undershoot 0.5/0.2 % C f = 10 kHz, VIN_CM = mid-supply – 0.5V -133 C f = 100 kHz, VIN_CM = mid-supply – 0.5V -110 dBc C 2nd Order Harmonic Distortion f = 1 MHz, VIN_CM = mid-supply – 0.5V -73 C f = 10 kHz, VIN_CM = mid-supply – 0.5V -137 C f = 100 kHz, VIN_CM = mid-supply – 0.5V -125 dBc C 3rd Order Harmonic Distortion f = 1 MHz, VIN_CM = mid-supply – 0.5V -78 C -75 dBc C 2nd Order Intermodulation Distortion f = 1 MHz, 200 kHz Tone Spacing, VOUT Envelope = 1 VPP, VIN_CM = mid-supply – 0.5V -81 dBc C 3rd Order Intermodulation Distortion Input voltage noise f = 100 KHz 9.3 nV/ √Hz C Voltage Noise 1/f corner frequency 147 Hz C Input current noise f = 1 MHz 0.45 pA/ √Hz C Current Noise 1/f corner frequency 14.7 kHz C Overdrive recovery time, Over/Under Overdrive = 0.5 V 140/125 ns C Closed-loop output impedance f = 100 kHz 0.028 Ω C Channel to channel crosstalk f = 10 kHz -120 dB C (OPA2835) (1) Test levels (all values set by characterization and simulation): (A) 100% tested at 25 °C; over temperature limits by characterization and simulation. (B) Not tested in production; limits set by characterization and simulation. (C) Typical value only for information. Copyright © 2011, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Link(s): OPA835 OPA2835 |
Similar Part No. - OPA835_1110 |
|
Similar Description - OPA835_1110 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |