![]() |
Electronic Components Datasheet Search |
|
HMC1013LP4E Datasheet(PDF) 6 Page - Hittite Microwave Corporation |
|
HMC1013LP4E Datasheet(HTML) 6 Page - Hittite Microwave Corporation |
6 / 8 page ![]() 11 11 - 6 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), 0.5 - 18.5 GHz Pin Number Function Description Interface Schematic 1-2, 7, 9-10, 12-13, 16, 18-19, 21, 23 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3, 5-6, 8, 11 GND These pins and the exposed package bottom must be connected to a high quality RF/DC ground. 4 RFIN RF Input pin 14, 15 VIDEO_FB VIDEO_OUT Video out and feedback. 17 EN Enable pin, connect to 3.3V supply for normal operation. Total supply current reduced to less than 11mA when EN is set to 0V. 20 VCC3 Bias Supply. Connect supply voltage to these pins with appropriate filtering. See application circuit. Pin Descriptions |
|