Electronic Components Datasheet Search |
|
LC651104L Datasheet(PDF) 7 Page - Sanyo Semicon Device |
|
LC651104L Datasheet(HTML) 7 Page - Sanyo Semicon Device |
7 / 14 page • Comparator input/port E input option Whether the 4 port pins PE0/CMP0, PE1/CMP1, PE2/CMP2, and PE3/CMP3 function as comparator inputs or as port E inputs can be selected. No. 5894-7/14 LC65P29 Option Conditions and notes Comparator inputs All 4 bits specified together Port E inputs All 4 bits specified together • Comparator function option One of two options relating to the comparator function can be selected. Usage Procedures • Option specification procedures User options can be selected interactively by running the LC6529 option entry software (SU60K). This creates an option file (file.opt). Assembling the user program with the macro assembler (M60K) creates an object file. An evaluation file (file.eva) can be created by linking the object file and the option file with the linker (L60K). Then, a HEX format object file, which includes both the user program and the mask options, can be created by converting the evaluation file with the file conversion software (E2H60K). This creates the option codes in the option specification area (locations 400 to 404H). It is also possible to store data directly to the option specification area. Refer to the option code creation table on page 9 to do this. Refer to the “LC65/66K Software Manual” for details. • EPROM programming procedure A general-purpose EPROM programmer can be used to write the created data to the LC65P29 by using a special- purpose write conversion board (either the W65EP29D or the W65EP29M). — The EPROM programmers listed below can be used. — The “27512 (VPP: 12.5 V) Intel fast write” method must be used for writing. Specify locations 0 to 404 as the address settings, and make sure that the DASEC jumper is in the off position. • Using the data security function The data security function is a function that prevents data written previously to the microcontroller EPROM from being read out. Use the following procedure to apply the data security to the LC65P29. 1. Set the DASEC jumper on the write conversion board to the on position. 2. Write the data once again. At this point, the EPROM writer will indicate an error since this function has operated, but actually, no error has occurred in either the programmer or the IC. Notes: • The data security function will not be applied if the data value FF is written to all address in step 2. • The data security function will not be applied if the sequence BLANK → PROGRAM → VERIFY is performed at step 2. • Always return the jumper to the off position after performing this procedure. Option Circuit Conditions and notes The comparator can be used without hysteresis. When used with an added external resistor, the comparator can be used with hysteresis. No feedback resistor Feedback resistor present Manufacturer Models that can be used ADVANTEST R4945, R4944A, R4943 or equivalent ANDO — AVAL — MINATO Electronics — |
Similar Part No. - LC651104L |
|
Similar Description - LC651104L |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |