Electronic Components Datasheet Search |
|
LC651154N Datasheet(PDF) 8 Page - Sanyo Semicon Device |
|
LC651154N Datasheet(HTML) 8 Page - Sanyo Semicon Device |
8 / 39 page No. 6278-8/39 LC651154N, 651154F, 651154L, 651152N, 651152F, 651152L Continued from preceding page. Symbol Number I/O Function Option At reset Handling when of pins unused PE0-PE1/ WDR 2 I/O • I/O port E0 to E1 Input in 4-bit units (IP instruction) Output in 4-bit units (OP instruction) Set and reset in 1-bit units (SPB and RPB instructions) Testing in 1-bit units (BP and BNP instructions) • PE0 also has a continuous pulse (64·Tcyc) output function. • PE1 becomes the watchdog reset pin WDR when selected for such as an option. (1) Open-drain output (2) Pull-up resistor • Options (1) and (2) can be specified in bit units (3) Normal port PE1 (4) Watchdog reset WDR • Either options (3) and (4) may be specified. High-level output (The output n- channel transistors in the off state.) Identical to those for PA0 to PA3 PF0/SI PF1/SO PF2/SCK PF3/INT 4 I/O • I/O port F0 to F3 The port functions and options are identical to those of PE0 to PE1 (See note.) • PF0 to PF3 have shared functions as the serial interface pins and the INT input. The function can be selected under program control. SI ... Serial input pin SO ... Serial output pin SCK ... Input and output of the serial clock signal INT ... Interrupt request input The serial I/O function can be switched between 4- bit and 8-bit transfers under program control. Note: There is no continuous pulse output function. Identical to those for PA0 to PA3 Identical to those for PA0 to PA3 The serial port functions are disabled. The interrupt source is set to INT. Identical to those for PA0 to PA3 PG0-PG3/ AD4-AD7 4 I/O • I/O port G0 to G3 The port functions and options are identical to those of PE0 to PE1 (See note.) Note: There is no continuous pulse output function. • All four pins have shared functions. PG0/AD4 - A/D converter input AD4 PG1/AD5 - A/D converter input AD5 PG2/AD6 - A/D converter input AD6 PG3/AD7 - A/D converter input AD7 Identical to those for PA0 to PA3 Identical to those for PA0 to PA3 Identical to those for PA0 to PA3 AV+ 1— A/D converter reference voltage input — — Connect to VSS. • System reset input • Applications must provide an external capacitor for the power-on reset. • Apply a low level to this pin for 4 clock cycles to effect and reset start. —— — AV– 1— RES 1 Input • IC test pin This pin must be connected to VSS during normal operation. —— This pin must be connected to VSS. TEST 1 Input |
Similar Part No. - LC651154N |
|
Similar Description - LC651154N |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |