![]() |
Electronic Components Datasheet Search |
|
LA70011 Datasheet(PDF) 9 Page - Sanyo Semicon Device |
|
LA70011 Datasheet(HTML) 9 Page - Sanyo Semicon Device |
9 / 11 page ![]() Envelope Detector Characteristic: Pin 6 The LA70011 includes a built-in playback signal envelope detector circuit for use in automating tracking adjustment. REC AMP Gain Control The LA70011 eliminates recording current adjustment by adding an automatic gain control circuit to the recording amplifier. It is also possible to change the recording current with the following methods. REC-CURRENT-ADJ2 Open The internal bias forces the DC level at pin 12 to 1/2 VCC (that is, approximately 2.5 V), and RO1 determines the recording current. Design values RO1 = 1.5 kΩ = 16.0 mA (SP) (per channel) RO1 = 1.5 kΩ =12.7 mA (EP) REC-CURRENT-ADJ2 Used Applying a DC control voltage between 1 and 4 V to pin 12 adjusts the figure determined by RO1 between –6.0 dB and +3.5 dB. No. 5710-9/11 LA70011, 70011M Pin 6 level - detector DC level (V) Pin 7 level - playback output level (mVp-p) Envelope detector voltage characteristic EP, with 18k Ω resistor on pin 6 SP, with 18k Ω resistor on pin 6 |
Similar Part No. - LA70011 |
|
Similar Description - LA70011 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |