Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

LA4485 Datasheet(PDF) 3 Page - Sanyo Semicon Device

Part No. LA4485
Description  5 W, Two-channel Power Amplifier with Very Few External Parts
Download  20 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  SANYO [Sanyo Semicon Device]
Direct Link  https://www.sanyo-av.com/us/
Logo SANYO - Sanyo Semicon Device

LA4485 Datasheet(HTML) 3 Page - Sanyo Semicon Device

  LA4485 Datasheet HTML 1Page - Sanyo Semicon Device LA4485 Datasheet HTML 2Page - Sanyo Semicon Device LA4485 Datasheet HTML 3Page - Sanyo Semicon Device LA4485 Datasheet HTML 4Page - Sanyo Semicon Device LA4485 Datasheet HTML 5Page - Sanyo Semicon Device LA4485 Datasheet HTML 6Page - Sanyo Semicon Device LA4485 Datasheet HTML 7Page - Sanyo Semicon Device LA4485 Datasheet HTML 8Page - Sanyo Semicon Device LA4485 Datasheet HTML 9Page - Sanyo Semicon Device Next Button
Zoom Inzoom in Zoom Outzoom out
 3 / 20 page
background image
Recommended LA4485 External Parts Arrangement (Dual-mode)
IC Usage Notes
Maximum ratings
Care must be taken when operating the LA4485 close to the maximum ratings as small changes in the operating conditions can
cause the maximum ratings to be exceeded, thereby breakdown will be caused.
Printed circuit board connections
Care must be taken when designing the circuit of printed board so as not to form feedback loops, particularly with the small-signal
and large-signal ground connections.
Notes on LA4485 heatsink mounting
1.
Mounting torque must be in the range 39 to 59 Nvcm.
2.
The spacing of the tapped holes in the heatsink must match the spacing of the holes in the IC tab.
3.
Use screws with heads equivalent to truss head machine screws and binding head machine screws stipulated by JIS for the
mounting screws. Furthermore, washers must be used to protect the surface of the IC tab.
4.
Make sure that there is no foreign matter, such as cutting debris, between the IC tab and the heatsink. If a heat conducting
compound is applied between the contact surfaces, make sure that it is spread uniformly over the entire surface.
5.
Because the heatsink mounting tab and the heatsink are at the same electric potential as the chip’s GND (large signal GND),
care must be taken when mounting the heatsink on more than one device.
6.
The heatsink must be mounted before soldering the pins to the PCB.
Comparison of External Parts Required
External parts
Existing device
LA4485
Output coupling capacitors
Yes
Yes
Input coupling capacitors
Yes
Yes
Bootstrap capacitors
Yes
No
Feedback capacitors
Yes
No
Filter capacitor
Yes
Optional
Phase compensating capacitor
Yes
No
Oscillation-quenching mylar capacitors
Yes
No
Oscillation-quenching resistors
Yes
No
Others
No
Optional
Total (for dual-mode)
15 to 16 parts
4 to 6 parts
Note: Supply capacitors, contained within the power IC, are not counted in both existing and new devices.
95.0
× 67.0 mm2
LA4485
No.3680-3/20


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20 


Datasheet Download

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn