Negative Output Charge

Pump Regulator (100mA)

R1250V××1A SERIES

1

OUTLINE

The R1250V××1A Series are Negative Output Charge Pump Regulator ICs, which can be developed as local power

suppliers for portable appliances and small electric appliances used with batteries, with low supply current by CMOS

process.

Each of these ICs consists of an oscillator, a control circuit, a reference voltage unit, an error amplifier, and an out-

put driver circuit. The R1250V××1A can easily supply negative voltage, or regulated setting output voltage in the

range from -2V to -4V from positive input voltage.

The chip enable function works to shut down the internal circuit and reduces supply current at the stand-by mode,

therefore the R1250V××1A is very suitable for the application such as portable systems that require low supply cur-

rent.

Since the package for this IC is TSSOP8 package (TSOP8 in EIAJ standard), high density mounting of the ICs on

board is possible.

FEATURES

• Output Voltage...................... Stepwise setting with a step of 0.1V in the range from -2.0V to -4.0V is possible.

+2.7V to +5.5V (Set Output Voltage=-2.7V to -2.0V)

• Oscillator Frequency ............ TYP. 280kHz

• Chip Enable Function (Active at “L”)

• Package ................................. TSSOP8

APPLICATIONS

• Power source for Disk Drives.

• Power source for hand-held communication equipment and battery-powered equipment.

• Power source for PC peripherals and ADD-ON cards.

• Power source for portable audio-visual appliances such as cameras.

• Local power source for small electrical appliances.