NL7SZ57

http://onsemi.com

7

Figure 10. Voltage Waveforms Pulse Duration

Figure 11. Voltage Waveforms Setup and Hold

Times

Figure 12. Voltage Waveforms Propagation Delay

Times Inverting and Noninverting Outputs

Figure 13. Voltage Waveforms Enable and

Disable Times Low− and High−Level Enabling

Input

Input

Output

Output

0 V

0 V

Output

Control

0 V

[0 V

Output

Output

Waveform 1

(Note 1)

Waveform 2

S1 at GND

(Note 2)

0 V

Timing Input

Data Input

0 V

1. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.

2. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control

4. The outputs are measured one at a time, with one transition per measurement.

5. All parameters are waveforms are not applicable to all devices.

ORDERING INFORMATION

Device

Package

NL7SZ57DFT2G

SC−88

(Pb−Free)

3000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.