1

wound0407_reli-RP3

wound0407_reli_e-01

＊This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

15. Resistance to soldering heat

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No significant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type

:

The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.

NR6020 Type :

Test board thickness : 1.0mm

Test board material : glass epoxy-resin

16. Thermal shock

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No significant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown

in below table in sequence. The temperature cycle shall be repeated 100 cycles.

Conditions of 1 cycle

Step

Temperature (℃)

Duration (min)

1

ー40±3

30±3

2

Room temperature

Within 3

3

＋85±2

30±3

4

Room temperature

Within 3

17. Damp heat

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No significant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Temperature

60±2℃

Humidity

90∼95%RH

Time

1000 hours.

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :

The test samples shall be soldered to the test board by the reflow.

The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.

Temperature

60±2℃

Humidity

90∼95%RH

Time

500±24hour

14. Solderability

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

At least 90％ of surface of terminal electrode is covered by new solder.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type :

The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.

Flux : Methanol solution containing rosin 25%.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :

Solder Temperature

245±5℃

Time

5±1.0 sec.

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Solder Temperature

245±5℃

Time

5±0.5 sec.

※Immersion depth : All sides of mounting terminal shall be immersed.