H5S

5

■ Operation

Note: 1. Depending the operation, the following steps can be used for weekly programs.

Timer operation: 2 steps

Pulse-output operation: 1 step

Cyclic operation: 4 steps

2. When the season switching setting is not being used.

3. When the season switching setting is being used.

■ Operation Functions

Item

Weekly 2-circuit Models

(H5S-W

@2)

Yearly 2-circuit Models

(H5S-Y

@2)

Yearly 4-circuit Models

(H5S-Y

@4)

Operation method

Digital quartz

Operation period

1 week (7 days)

1 year (with integrated calendar to 2099)

Display

• Day, hrs (switchable between 24-hr indication and a.m./p.m. 12-hr indication), minutes, seconds

(0.00 to 23:59, 0.00 to 11:59 a.m., 0.00 to 11:59 p.m.)

• Digital indication by LCD (character height: 10 mm)

• Digital display of operation schedule during operation

• Timing chart display of operation schedule during operation

Min. setting unit

1 min

Number of

steps that

can be set

Weekly program

(See note 1.)

40 steps/circuit

48 steps/circuit (See note 2.)

24 steps/circuit (per season) (See

note 3.)

48 steps/circuit (See note 2.)

12 steps/circuit (per season) (See

note 3.)

Yearly program

---

4 yearly programs/circuit

Number of

settable yearly

temporary

holiday settings

---

16

Item

Weekly 2-circuit Models (H5S-W

@2)

Yearly 2-circuit Models (H5S-Y

@2)

Yearly 4-circuit Models (H5S-Y

@4)

Weekly timer

operation

Controls the output according to the set time of ON and OFF.

• Min. setting unit: 1 min

• Multiple-day operation also possible.

Weekly pulse-

output

operation

Output turns ON for a fixed period (pulse width) at the set ON time.

• Pulse width: 1 to 59 s (in 1-s increments), or 1 to 60 min (in 1-min increments)

• The pulse width can be set for each step.

Weekly cyclic

operation

Repeatedly turns ON and OFF during the period from the cyclic start time to the stop time.

Independent ON- and OFF-time settings are possible.

• Min. setting unit: 1 min

The timer operation repeatedly turns the signal ON and OFF for the time widths specified

by the ON time and OFF time during the period from the day of the week and time that are

set for the cyclic start time to the day of the week and time that are set for the stop time.

Yearly timer

operation

---

Adds a yearly timer operation to the weekly timer program.

For details, refer to About Yearly Programs on page 18.

Yearly pulse-

output

operation

---

Adds a yearly pulse-output operation to the weekly pulse-output program.

For details, refer to About Yearly Programs on page 18.

Temporary

holiday setting

Sets temporary holidays (non-operating days) without having to revise the existing program.

For details, refer to Setting Temporary Holidays (Weekly) and Setting Temporary Holidays (Yearly) on page 20.

Day override

operation

Executes the operation for one day

temporarily on another day in the 7-day

period starting from the current day.

For details, refer to Day Override

Operation on page 21.

---

Program check Consecutively displays the days and times when the output is set to turn ON and OFF over the course of one week in the

sequence in which the Time Switch is to operate.

For details, refer to Program Check Function on page 21.

ON

OFF

Timer operation

Pulse output operation

ON

Pulse width

Cyclic operation

Stop

Start

ON

OFF

()