Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

TNY264 Datasheet(PDF) 1 Page - Power Integrations, Inc.

Part No. TNY264
Description  Enhanced, Energy Efficient, Low Power Off-line Switcher
Download  20 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  POWERINT [Power Integrations, Inc.]
Homepage  http://www.powerint.com
Logo 

TNY264 Datasheet(HTML) 1 Page - Power Integrations, Inc.

 
Zoom Inzoom in Zoom Outzoom out
 1 / 20 page
background image
TNY264/266-268
TinySwitch-II Family
Enhanced, Energy Efficient,
Low Power Off-line Switcher
®
Figure 1. Typical Standby Application.
Product Highlights
TinySwitch-II Features Reduce System Cost
• Fully integrated auto-restart for short circuit and open
loop fault protection–saves external component costs
• Built-in circuitry practically eliminates audible noise with
ordinary varnished transformer
• Programmable line under-voltage detect feature prevents
power on/off glitches–saves external components
• Frequency jittering dramatically reduces EMI (~10 dB)
–minimizes EMI filter component costs
• 132 kHz operation reduces transformer size–allows use of
EF12.6 or EE13 cores for low cost and small size
• Very tight tolerances and negligible temperature variation
on key parameters eases design and lowers cost
• Lowest component count switcher solution
Better Cost/Performance over RCC & Linears
• Lower system cost than RCC, discrete PWM and other
integrated/hybrid solutions
• Cost effective replacement for bulky regulated linears
• Simple ON/OFF control–no loop compensation needed
• No bias winding–simpler, lower cost transformer
EcoSmart
®–Extremely Energy Efficient
• No load consumption < 50 mW with bias winding and
< 250 mW without bias winding at 265 VAC input
• Meets Blue Angel, Energy Star, and EC requirements
• Ideal for cell-phone charger and PC standby applications
High Performance at Low Cost
• High voltage powered–ideal for charger applications
• High bandwidth provides fast turn on with no overshoot
• Current limit operation rejects line frequency ripple
• Built-in current limit and thermal protection
Description
TinySwitch-II maintains the simplicity of the TinySwitch
topology, while providing a number of new enhancements to
further reduce system cost and component count, and to
practically eliminate audible noise. Like TinySwitch, a 700 V
power MOSFET, oscillator, high voltage switched current source,
current limit and thermal shutdown circuitry are integrated onto a
monolithic device. The start-up and operating power are derived
directly from the voltage on the DRAIN pin, eliminating the
need for a bias winding and associated circuitry. In addition, the
PI-2684-101700
Wide-Range
HV DC Input
D
S
EN/UV
BP
+
-
+
-
DC Output
TinySwitch-II
Optional
UV Resistor
®
July 2001
PRODUCT(3)
Adapter(1)
Open
Frame(2)
Open
Frame(2)
OUTPUT POWER TABLE
Table 1. Notes: 1. Typical continuous power in a non-ventilated enclosed
adapter measured at 50 ˚C ambient. 2. Maximum practical continuous
power in an open frame design with adequate heat sinking, measured at
50 ˚C ambient (See key applications section for details). 3. Packages:
P: DIP-8B, G: SMD-8B. Please see part ordering information.
230 VAC
±15%
Adapter(1)
85-265 VAC
5.5 W
9 W
4 W
6 W
10 W
15 W
6 W
9.5 W
13 W
19 W
8 W
12 W
16 W
23 W
10 W
15 W
TNY264P or G
TNY266P or G
TNY267P or G
TNY268P or G
TinySwitch-II devices incorporate auto-restart, line under-
voltage sense, and frequency jittering. An innovative design
minimizes audio frequency components in the simple ON/OFF
control scheme to practically eliminate audible noise with
standard taped/varnished transformer construction. The fully
integrated auto-restart circuit safely limits output power during
fault conditions such as output short circuit or open loop,
reducing component count and secondary feedback circuitry
cost. An optional line sense resistor externally programs a line
under-voltage threshold, which eliminates power down glitches
caused by the slow discharge of input storage capacitors present
in applications such as standby supplies. The operating frequency
of 132 kHz is jittered to significantly reduce both the quasi-peak
and average EMI, minimizing filtering cost.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn