1

NEW

2008.5w

1. Low profile on the PCB

When mounted on the PCB surface the receptacle height

is 2.0 mm.

2. Strong Construction

Use of metal shell and advanced plastics guarantees that

fully mated connectors will withstand 30 N max. force

applied on the plug in any direction.

3. High durability

5000 mating/un-mating cycles without any degradation of

electrical or mechanical performance.

Tactile sensation when mating confirms complete mated

condition and assures secure retention of the plug.

4. Sequenced contact mating

The protection of the circuit is assured by having the 2

contact at each end of the receptacle protrude forward by

0.5 mm, with electrical wipe of 1.45 mm. Location of the

circuit protection contacts can be changed as required.

Remaining contacts electrical wipe is 0.95 mm.

5. Incorrect Insertion Prevention

Connectors will not be damaged when angled or reverse

plug insertion is attempted.

6. Safety plug release

Plug will release when an excessive pull force is applied

to the cable.

7. RoHS Compliant

All components and materials comply with the

requirements of the EU Directive 2002/95/EC.

Existing 3200 Series

LX Series

30N

30N

Hirose’s next generation of interface connectors

further reduces the mounting height of the

receptacle by approximately 30% (compared with

the 3200 Series receptacle).

High durability, secure mating, electrostatic

protection and ease of operation guarantees

reliable and consistent performance in demanding

consumer applications.

Angled insertion

Reversed insertion

Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height

LX Series

Lower Profile

Strong Construction

Incorrect insertion prevention

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.