Electronic Components Datasheet Search |
|
TCA6507PWG4 Datasheet(PDF) 8 Page - Texas Instruments |
|
|
TCA6507PWG4 Datasheet(HTML) 8 Page - Texas Instruments |
8 / 32 page www.ti.com Register Descriptions TCA6507 LOW-VOLTAGE 7-BIT I2C AND SMBus LED DRIVER WITH INTENSITY CONTROL AND SHUTDOWN SCPS164B – MAY 2007 – REVISED NOVEMBER 2007 The Select0 register (register 0), Select1 (register 1), and Select2 register (register 2) configure the state of each of the outputs (see Table 4) . Table 4. Select2, Select1, and Select0 Register States SELECT2 SELECT1 SELECT0 STATE 0 0 0 LED off (high impedance) 0 0 1 LED off (high impedance) 0 1 0 LED on steadily with maximum intensity value of PWM0 (ALD value or BRIGHT_F0 value) 0 1 1 LED on steadily with maximum intensity value of PWM1 (ALD value or BRIGHT_F1 value) 1 0 0 LED fully on (output low). Can be used as general-purpose output 1 0 1 LED on at brightness set by One Shot / Master Intensity register 1 1 0 LED blinking with intensity characteristics of BANK0 (PWM0) 1 1 1 LED blinking with intensity characteristics of BANK1 (PWM1) Table 5. Register 0 (Select0 Register) BIT S0-7 S0-6 S0-5 S0-4 S0-3 S0-2 S0-1 S0-0 DEFAULT X(1) 0 0 0 0 0 0 0 (1) X = Don't care Table 6. Register 1 (Select1 Register) BIT S1-7 S1-6 S1-5 S1-4 S1-3 S1-2 S1-1 S1-0 DEFAULT X(1) 0 0 0 0 0 0 0 (1) X = Don't care Table 7. Register 2 (Select2 Register) BIT S1-7 S1-6 S1-5 S1-4 S1-3 S1-2 S1-1 S1-0 DEFAULT X(1) 0 0 0 0 0 0 0 (1) X = Don't care To use a P port as a general-purpose output, Select1 and Select0 registers must be set low (or 0), then the inverse of the data written to the Select2 bit appears on the open-drain output. The intensity of each bank of LEDs can be customized by programming six registers: Fade-On Time, Fully-On Time, Fade-Off Time, First Fully-Off Time, Second Fully-Off Time, and Maximum Intensity registers. Each bank is designed to produce two identical intensity pulses per blink cycle. Both pulses have the same fade-on, fully-on and fade-off times, but independent fully-off times to achieve a double-blink effect when desired. The Fade-On Time register (register 3) defines the time from the fully-off state to the fully-on state for the LED per region A in Figure 7. The first four bits (C7–C4) in this register set the fade-on time for BANK1, and the next four bits (C3–C0) set the fade-on time for BANK0. The data for each bank is a binary number between 0 and 15. For BANK1, the MSB is bit C7, while the least significant bit (LSB) is bit C4. For BANK0, the MSB is bit C3 while the LSB is bit C0. See Table 13 for more information. Table 8. Register 3 (Fade-On Time Register) BANK BANK1 BANK0 BIT C7 C6 C5 C4 C3 C2 C1 C0 DEFAULT 0 1 0 0 0 1 0 0 8 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated Product Folder Link(s): TCA6507 |
Similar Part No. - TCA6507PWG4 |
|
Similar Description - TCA6507PWG4 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |