Electronic Components Datasheet Search |
|
PCA9306DCTR Datasheet(PDF) 2 Page - Texas Instruments |
|
|
PCA9306DCTR Datasheet(HTML) 2 Page - Texas Instruments |
2 / 16 page PCA9306 SCPS113I – OCTOBER 2004 – REVISED JULY 2008....................................................................................................................................................... www.ti.com As with the standard I2C system, pullup resistors are required to provide the logic high levels on the translator's bus. The PCA9306 has a standard open-collector configuration of the I2C bus. The size of these pullup resistors depends on the system, but each side of the repeater must have a pullup resistor. The device is designed to work with standard-mode and fast-mode I2C devices, in addition to SMBus devices. Standard-mode I2C devices only specify 3 mA in a generic I2C system where standard-mode devices and multiple masters are possible. Under certain conditions, high termination currents can be used. When the SDA1 or SDA2 port is low, the clamp is in the ON state, and a low resistance connection exists between the SDA1 and SDA2 ports. Assuming the higher voltage is on the SDA2 port when the SDA2 port is high, the voltage on the SDA1 port is limited to the voltage set by VREF1. When the SDA1 port is high, the SDA2 port is pulled to the drain pullup supply voltage (VDPU) by the pullup resistors. This functionality allows a seamless translation between higher and lower voltages selected by the user, without the need for directional control. The SCL1/SCL2 channel also functions as the SDA1/SDA2 channel. All channels have the same electrical characteristics, and there is minimal deviation from one output to another in voltage or propagation delay. This is a benefit over discrete transistor voltage translation solutions, since the fabrication of the switch is symmetrical. The translator provides excellent ESD protection to lower-voltage devices and at the same time protects less ESD-resistant devices.t ORDERING INFORMATION TA PACKAGE(1)(2) ORDERABLE PART NUMBER TOP-SIDE MARKING(3) Reel of 3000 PCA9306DCTR SSOP – DCT 7BD_ _ _ Reel of 250 PCA9306DCTT –40°C to 85°C Reel of 3000 PCA9306DCUR VSSOP – DCU 7BD_ Reel of 250 PCA9306DCUT (1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. (2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. (3) DCT: The actual top-side marking has three additional characters that designate the year, month, and wafer fab/assembly site. DCU: The actual top-side marking has one additional character that designates the assembly/test site. TERMINAL FUNCTIONS TERMINAL DESCRIPTION NAME NO. GND 1 Ground, 0 V VREF1 2 Low-voltage-side reference supply voltage for SCL1 and SDA1 SCL1 3 Serial clock, low-voltage side SDA1 4 Serial data, low-voltage side SDA2 5 Serial data, high-voltage side SCL2 6 Serial clock, high-voltage side VREF2 7 High-voltage-side reference supply voltage for SCL2 and SDA2 EN 8 Switch enable input 2 Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): PCA9306 |
Similar Part No. - PCA9306DCTR |
|
Similar Description - PCA9306DCTR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |