Electronic Components Datasheet Search |
|
HAL825UT-A Datasheet(PDF) 4 Page - Micronas |
|
HAL825UT-A Datasheet(HTML) 4 Page - Micronas |
4 / 32 page HAL82x DATA SHEET 4 Feb. 3, 2009; DSH000143_003EN Micronas High-Precision Programmable Linear Hall-Effect Sensor Family Release Note: Revision bars indicate significant changes to the previous edition. 1. Introduction The HAL82x is a new member of the Micronas family of programmable linear Hall sensors. As an extension to the HAL 8x5, it offers an improved temperature per- formance, enhanced wiring failure detection and a 14- bit multiplexed analog data output. It is possible to pro- gram different sensors which are in parallel to the same supply voltage individually. The HAL82x is an universal magnetic field sensor with a linear output based on the Hall effect. The IC can be used for angle or distance measurements if combined with a rotating or moving magnet. The major charac- teristics like magnetic field range, sensitivity, output quiescent voltage (output voltage at B = 0 mT), and output voltage range are programmable in a non-vola- tile memory. The sensor has a ratiometric output char- acteristic, which means that the output voltage is pro- portional to the magnetic flux and the supply voltage. The HAL82x features a temperature-compensated Hall plate with choppered offset compensation, an A/D converter, digital signal processing, a D/A converter with output driver, an EEPROM memory with redun- dancy and lock function for the calibration data, an EEPROM for customer serial number, a serial inter- face for programming the EEPROM, and protection devices at all pins. The internal digital signal process- ing is of great benefit because analog offsets, temper- ature shifts, and mechanical stress do not degrade the sensor accuracy. The HAL82x is programmable by modulating the sup- ply voltage. No additional programming pin is needed. The easy programmability allows a 2-point calibration by adjusting the output voltage directly to the input sig- nal (like mechanical angle, distance, or current). Indi- vidual adjustment of each sensor during the cus- tomer’s manufacturing process is possible. With this calibration procedure, the tolerances of the sensor, the magnet, and the mechanical positioning can be com- pensated in the final assembly. This offers a low-cost alternative for all applications that presently need mechanical adjustment or laser trimming for calibrating the system. In addition, the temperature compensation of the Hall IC can be fit to common magnetic materials by pro- gramming first and second order temperature coeffi- cients of the Hall sensor sensitivity. This enables oper- ation over the full temperature range with high accuracy. The calculation of the individual sensor characteristics and the programming of the EEPROM memory can easily be done with a PC and the application kit from Micronas. The sensor is designed for hostile industrial and automotive applications and operates with typically 5 V supply voltage in the ambient temperature range from −40 °C up to 150 °C. The HAL 82x is available in the very small leaded packages TO92UT-1 and TO92UT-2. 1.1. Major Applications Due to the sensor’s versatile programming character- istics and low temperature drifts, the HAL82x is the optimal system solution for applications such as: – contactless potentiometers, – angle sensors (like throttle position, paddle position and EGR applications), – distance measurements, – magnetic field and current measurement. 1.2. Features – high-precision linear Hall effect sensor with ratio- metric output and digital signal processing – Low output voltage drifts over temperature – 12-bit analog output and 14-bit multiplex analog output – multiple programmable magnetic characteristics in a non-volatile memory (EEPROM) with redundancy and lock function – open-circuit (ground and supply line break detec- tion) with 5 k Ω pull-up and pull-down resistor, over- voltage and undervoltage detection – for programming an individual sensor within several sensors in parallel to the same supply voltage, a selection can be done via the output pin – temperature characteristics are programmable for matching common magnetic materials – programmable clamping function – programming through a modulation of the supply voltage – operates from −40 °C up to 150 °C ambient temper- ature – operates from 4.5 V up to 5.5 V supply voltage in specification and functions up to 8.5 V – operates with static magnetic fields and dynamic magnetic fields up to 1 kHz |
Similar Part No. - HAL825UT-A |
|
Similar Description - HAL825UT-A |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |