Electronic Components Datasheet Search |
|
D2SW-P2L3D Datasheet(PDF) 2 Page - Omron Electronics LLC |
|
D2SW-P2L3D Datasheet(HTML) 2 Page - Omron Electronics LLC |
2 / 8 page 202 Sealed Subminiature Basic Switch D2SW-P Specifications ■ Characteristics Note: 1. The data given above are initial values. 2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate. 3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within 1ms. ■ Ratings Note: The ratings values apply under the following test conditions. Ambient temperature: 20±2°C Ambient humidity: 65±5% Operating frequency: 20 operations/min. ■ Approved Standards UL Recognized CSA Certified ■ Contact Specifications Note: Minimum applicable loads are indicated by N standard refer- ence values. This value represents the failure rate at a 60% (λ 60) reliability level (JIS C5003). The equation λ 60=0.5 x 10 -6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% ■ Contact Form Note: Lead wire colors are indicated in parentheses. Item Model D2SW-P2 D2SW-P01 Operating speed 0.1 mm to 500 mm/s (pin plunger models) Operating frequency Mechanical: 120 operations/min max. Electrical: 20 operations/min max. Insulation resistance 100 M Ω min. (at 500 VDC) Contact resistance Terminal models: 50 m Ω max. Molded lead wire models: 100 m Ω max. Terminal models: 100 m Ω max. Molded lead wire models: 150 m Ω max. Dielectric strength (see note 2) 1,000 VAC, 50/60 Hz for 1 min. between terminals of the same polarities 600 VAC, 50/60 Hz for 1 min. between terminals of the same polarities 1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance (see note 3) Destruction: 1,000 m/s2 (approx. 100 G) max. Malfunction: 300 m/s2 (approx. 30 G) max. Degree of protection IEC IP67 (excluding the terminals on terminal models) Degree of protection against electric shock Class I Proof tracking index (PTI) 175 Ambient operating temperature -20 °C to 70°C (at 60% RH max.) with no icing Ambient operating humidity 85% max. (for 5 °C to 35°C) Life expectancy Mechanical: 1,000,000 operations min. (60 operations/min.) Electrical: 50,000 operations min. (20 operations/min.) Mechanical: 1,000,000 operations min. (60 operations/min.) Electrical: 200,000 operations min. (20 operations/min.) Weight Approx. 2 g (pin plunger models with terminals) Model Rated voltage Resistive load D2SW-P2 30 VDC 2 A 250 VAC D2SW-P01 30 VDC 0.1 A 125 VAC Rated voltage D2SW-P2 D2SW-P01 125 VAC 250 VAC — 2 A 0.1 A — 30 VDC 2 A 0.1 A Item D2SW-P2 D2SW-P01 Specification Rivet Crossbar Material Silver alloy Gold alloy Gap (standard value) 0.5 mm Minimum applicable load (see note) 160 mA at 5 VDC 1 mA at 5 VDC SPDT SPST-NC (wire models, only) SPST-NO (wire models, only) COM NO NC (Black) (Blue) (Red) COM NC (Black) (Red) COM NO (Black) (Blue) |
Similar Part No. - D2SW-P2L3D |
|
Similar Description - D2SW-P2L3D |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |