Electronic Components Datasheet Search |
|
HYMD264G726D4-K Datasheet(PDF) 8 Page - Hynix Semiconductor |
|
HYMD264G726D4-K Datasheet(HTML) 8 Page - Hynix Semiconductor |
8 / 30 page Rev. 1.1 /May. 2005 8 184pin Registered DDR SDRAM DIMMs ABSOLUTE MAXIMUM RATINGS1 Note: 1. Operation at above absolute maximum rating can adversely affect device reliability Parameter Symbol Rating Unit Operating Temperature (Ambient) TA 0 ~ 70 oC Storage Temperature TSTG -55 ~ 150 oC Voltage on VDD relative to VSS VDD -1.0 ~ 3.6 V Voltage on VDDQ relative to VSS VDDQ -1.0 ~ 3.6 V Voltage on inputs relative to Vss VINPUT -1.0 ~ 3.6 V Voltage on I/O pins realtive to Vss VIO -0.5 ~3.6 V Output Short Circuit Current IOS 50 mA Soldering Temperature ⋅ Time TSOLDER 260 ⋅ 10 oC ⋅ Sec DC OPERATING CONDITIONS (TA=0 to 70 oC, Voltage referenced to VSS = 0V) Note: 1. VDDQ must not exceed the level of VDD. 2. VIL (min) is acceptable -1.5V AC pulse width with < 5ns of duration. 3. VREF is expected to be equal to 0.5*VDDQ of the transmitting device, and to track variations in the dc level of the same. Peak to peak noise on VREF may not exceed ± 2% of the DC value. 4. VID is the magnitude of the difference between the input level on CK and the input level on /CK. 5. The ratio of the pullup current to the pulldown current is specified for the same temperature and voltage, over the entire tempera- ture and voltage range, for device drain to source voltages from 0.25V to 1.0V. For a given output, it represents the maximum differ- ence between pullup and pulldown drivers due to process variation. The full variation in the ratio of the maximum to minimum pullup and pulldown current will not exceed 1/7 for device drain to source voltages from 0.1 to 1.0. 6. VIN=0 to VDD, All other pins are not tested under VIN =0V. 7. DQs are disabled, VOUT=0 to VDDQ. Parameter Symbol Min Typ. Max Unit Note Power Supply Voltage VDD 2.3 2.5 2.7 V Power Supply Voltage VDDQ 2.3 2.5 2.7 V 1 Input High Voltage VIH VREF + 0.15 - VDDQ + 0.3 V Input Low Voltage VIL -0.3 - VREF - 0.15 V 3 Termination Voltage VTT VREF - 0.04 VREF VREF + 0.04 V Reference Voltage VREF 0.49*VDDQ 0.5*VDDQ 0.51*VDDQ V 4 Input Voltage Level, CK and CK inputs VIN(DC) -0.3 - VDDQ+0.3 V Input Differential Voltage, CK and CK inputs VID(DC) 0.36 - VDDQ+0.6 V 5 V-I Matching: Pullup to Pulldown Current Ratio VI(RATIO) 0.71 - 1.4 - 6 Input Leakage Current ILI -2 - 2 uA 7 Output Leakage Current ILO -5 - 5 uA 8 Normal Strength Output Driver (VOUT=VTT ± 0.84) Output High Current (min VDDQ, min VREF, min VTT) IOH -16.8 - - mA Output Low Current (min VDDQ, max VREF, max VTT) IOL 16.8 - - mA Half Strength Output Driver (VOUT=VTT ± 0.68) Output High Current (min VDDQ, min VREF, min VTT) IOH -13.6 - - mA Output Low Current (min VDDQ, max VREF, max VTT) IOL 13.6 - - mA |
Similar Part No. - HYMD264G726D4-K |
|
Similar Description - HYMD264G726D4-K |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |