© Coilcraft, Inc. 2010
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors – SER1400 Series
Document 609-1
Document 609-1
Revised 01/22/10
Designer’s Kit C427 contains 3 each of all values
Core material Ferrite
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +125°C with
Irms current, +125°C
to +165°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Only pure water or alcohol recommended
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Specially formed terminations provide small footprint
•
Isat ratings as high as 85 A
• Other inductance, DCR, height combinations are possible
1. When ordering, please specify termination and packaging codes:
SER1410-202M
ED
Termination: E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging:
D =13
″ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP
4263B LCR meter or equivalent.
3. DCR measured on a Keithley 580 micro-ohmmeter or equivalent.
4. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
High Isat for high Isat applications
SRF
Isat (A)5
Irms (A)6
Inductance2
DCR typ3
DCR max3
typ4
10%
20%
30%
20°C
40°C
Height max
Part number1
±20% (µH)
(mOhms)
(mOhms)
(MHz)
drop
drop
drop
rise
rise
(inches / mm)
SER1412-301ME_
0.30
1.30
1.43
154
85.0
85.0
85.0
30
37
0.498 / 12,66
SER1412-501ME_
0.50
1.30
1.43
122
52.0
54.5
55.5
30
37
0.498 / 12,66
SER1412-681ME_
0.68
1.30
1.43
100
40.0
41.0
42.3
30
37
0.498 / 12,66
SER1412-102ME_
1.0
1.30
1.43
78
29.0
31.5
32.5
30
37
0.498 / 12,66
SER1412-152ME_
1.5
1.30
1.43
62
22.0
24.0
25.0
30
37
0.498 / 12,66
SER1412-202ME_
2.0
1.30
1.43
50
17.0
19.0
20.0
30
37
0.498 / 12,66
SER1412-362ME_
3.6
1.30
1.43
35
11.0
12.1
12.1
30
37
0.498 / 12,66
Low DCR for high Irms applications
DCR
DCR
SRF
Isat (A)5
Irms (A)6
Inductance2
typ3
max3
typ4
10%
20%
30%
20°C
40°C
Height max
Part number1
±20% (µH)
(mOhms)
(mOhms)
(MHz)
drop
drop
drop
rise
rise
(inches / mm)
SER1408-301ME_
0.30
0.48
0.55
140
38.0
39.5
40.5
38
42
0.325 / 8,26
SER1408-501ME_
0.50
0.48
0.55
83
25.5
29.5
30.5
38
42
0.325 / 8,26
SER1408-681ME_
0.68
0.48
0.55
63
20.0
22.2
22.8
38
42
0.325 / 8,26
SER1408-102ME_
1.0
0.48
0.55
48
11.2
14.0
15.5
38
42
0.325 / 8,26
SER1410-152ME_
1.5
0.90
0.99
53
17.0
19.0
20.5
33
39
0.416 / 10,56
SER1410-202ME_
2.0
0.90
0.99
45
12.0
15.0
16.0
33
39
0.416 / 10,56