Electronic Components Datasheet Search |
|
NFS110-7612J Datasheet(PDF) 3 Page - Emerson Network Power |
|
NFS110-7612J Datasheet(HTML) 3 Page - Emerson Network Power |
3 / 5 page Rev. 11.2.09_69 NFS110 Series 3 of 5 Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 Notes 1 Convection cooled, 80 W maximum. 2 Peak outputs lasting less than 60 seconds with duty cycle less than 10%. Total peak power must not exceed 110 W. 3 Forced air, 20 CFM at 1 atmosphere, 110 W maximum. 4 Figure is peak-to-peak. Output ripple is measured across a 50 MHz bandwidth using a 12 inch twisted pair terminated with a 47 µF capacitor. 5 Total regulation is defined as the static output regulation at 25 °C, including initial tolerance, line voltage within stated limits and output voltages adjusted to their factory settings. 6 To achieve stated regulation on the 24 V output on the NFS110-7602PJ, the following load condition must be true: IA / IB ≤ 5, where: IA = +5.1 V output current, and IB = +24 V output current The +24 V output will maintain ±5.0% regulation under the following additional condition: IA ≤ 5 A. 7 Single output models have floating outputs which may be referenced as either positive or negative. Higher voltage supplies may be adjusted over a wide output voltage range, as long as the total output power does not exceed 80 Watts (natural convection) or 110 Watts (forced air). 8 Power fail detect not available on single output models. 9 Derating curve is application specific for ambient temperatures >50 °C, for optimum reliability no part of the heatsink should exceed 90 ºC and no semiconductor case temperature should exceed 100 ºC. 10 Caution: Allow a minimum of 1 second after disconnecting the power when making thermal measurements. 11 Three orthogonal axes, random vibration, 10 minute test for each axis. 12 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 13 Recommend a minimum load of 11 W to achieve the design MTBF. See the derating curve on page 4. 14 Power failure detec is optional by including the suffix “P” to the model number. 15 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 16 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.PowerConversion.com to find a suitable alternative. Ordering Information Output Voltage Output Currents Ripple (4) Total Regulation (5) Model Numbers (13, 15, F) Max (1) Peak (2) Fan (3) +5.1 V 8 A 20 A 10 A 50 mV ± 2.0% NFS110-7601PJ (14) +12 V 4.5 A 9 A 5 A 120 mV ± 3.0% –12 V 0.5 A 1.5 A 1 A 120 mV ± 3.0% –5 V 0.5 A 1.5 A 1 A 50 mV ± 3.0% +5.1 V (IA) 8 A 20 A 10 A 50 mV ± 2.0% NFS110-7602PJ (6, 14) +24 V (IB) (6) 3.5 A 4.5 A 4.5 A 240 mV +10/–5.0% +12 V 4.5 A 9 A 5 A 120 mV ± 3.0% –12 V 0.5 A 1.5 A 1 A 120 mV ± 3.0% +5.1 V 8 A 20 A 10 A 50 mV ± 2.0% NFS110-7604PJ (14) 15 V 4 A 7.5 A 5 A 150 mV ± 4.0% -15 V 0.5 A 1.5 A 1 A 150 mV ± 3.0% -5 V 0.5 A 1.5 A 1 A 50 mV ± 3.0% 12 V 7 A 9 A 9 A 120 mV ± 2.0% NFS110-7612J (7,8) 15 V 5 A 7.3 A 7.3 A 150 mV ± 2.0% NFS110-7615J (7,8) 24 V 3.5 A 4.5 A 4.5 A 240 mV ± 2.0% NFS110-7624J (7,8) Transient Response NFS110-7601PJ +5.1 V (7.5 A to 10 A) +12 V (2.5 A to 5 A) -12 V (0.5 A to 1 A) -5 V (0.5 A to 1 A) 150 mV peak, 1 ms recovery 100 mV peak, 0.5 ms recovery 100 mV peak, 0.5 ms recovery 100 mV peak, 0.5 ms recovery NFS110-7602PJ +5.1 V (7.5 A to 10 A) +24 V (1.5 A to 3 A) +12 V (2.5 A to 5 A) -12 V (0.5 A to 1 A) 150 mV peak, 1 ms recovery 300 mV peak, 1 ms recovery 100 mV peak, 0.5 ms recovery 100 mV peak, 0.5 ms recovery NFS110-7604PJ +5.1 V (7.5 A to 10 A) +15 V (2.5 A to 5 A) -15 V (0.5 A to 1 A) -5 V (0.5 A to 1 A) 150 mV peak, 1 ms recovery 100 mV peak, 0.5 ms recovery 100 mV peak, 0.5 ms recovery 100 mV peak, 0.5 ms recovery NFS110-7605J +5.1 V (10 A to 20 A) 250 mV peak, 1 ms recovery NFS110-7612J: +12 V (4.5 A to 9 A) 360 mV peak, 1 ms recovery NFS110-7615J +15 V (3.65 A to 7.3 A) 450 mV peak, 1 ms recovery NFS110-7624J +24 V (2.25 A to 4.5 A) 720 mV peak, 1 ms recovery |
Similar Part No. - NFS110-7612J |
|
Similar Description - NFS110-7612J |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |