![]() |
Electronic Components Datasheet Search |
|
JRGB1316LS Datasheet(PDF) 13 Page - STANLEY ELECTRIC CO.,LTD. |
|
JRGB1316LS Datasheet(HTML) 13 Page - STANLEY ELECTRIC CO.,LTD. |
13 / 15 page ![]() Reflow Soldering Conditions Manual Soldering Conditions Iron tip temp. Soldering time and frequency 3 s 1 time 350 ℃ (MAX.) (MAX.) (MAX.) PLCC-6 Type Tri-color JRGB1316LS 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Page 13 2009.3.23 |
|